Trunk pop wiring
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2007
Location: tha burgh, PA
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
Trunk pop wiring
so i have a couple questions regarding a trunk pop solenoid installed with my alarm. where do i install the trunk pop button when i am also using my alarms AUX wired like this -
also will a fused 18ga. wire straight from the battery be sufficient to run it?
thanks!
also will a fused 18ga. wire straight from the battery be sufficient to run it?
thanks!
#2
Old Fart
Join Date: May 2004
Location: kelowna, bc, canada
Posts: 26,173
Likes: 0
Received 14 Likes
on
14 Posts
Re: Trunk pop wiring
Need to know what the current draw of the solenoid is to know what gauge of wire to use.
If you also want to install a "manual" button for trunk/hatch release then connect one side to chassis ground and the other to #85, same place as the alarms control lead. 94
If you also want to install a "manual" button for trunk/hatch release then connect one side to chassis ground and the other to #85, same place as the alarms control lead. 94
Thread
Thread Starter
Forum
Replies
Last Post