Bulli Kid

i got a free 12" wolfenhag sub
500 rms

i also got a free Power Acoustik G840-2 Amplifier
2 channel amp but one channel doesn't work.
Dont really matter since i will be only using one sub, but its not goign to be close to the 500 rms the sub needs.

i was thinking about bridging it but if the other channel doesn't work thats not possible right?

ps. where can i get a nice Line out converter LOC

fcm

No you can't bridge a 2ch amp with one channel down.

How good a LOC are you looking for, they start at about $10? 94

Bulli Kid

i think i will get his one
26 total with shipping
<A HREF="http://www.crutchfield.com/App/Product/Item/Main.aspx?search=LOC&i=142SLC4
" TARGET="_blank">http://www.crutchfield.com/App...LC4
</A>
thanks for the info man!
one more thing one of my power screws from the amp are gone!
i was at a store and they say they have no idea were to get some.
How can i fix this problem?

all i have in mind is take one off another amp but thats not possible

Bulli Kid

this will be my first time installing subs and what not but i get the big picture and its not that hard.

here is a diagram i drew of how things have to go and i have some questions following it.




the LOC is a 4 channel so i just use one set of the cables right?

how will i know which one is positive or negative upon installing the LOc?

how will i know what wire to tap for the remote?
what other easy places can i tap in for remote?

Here is a diagram of how i think my sub should be wired for the amp. is it right?

fcm

The link is no good. 94

Bulli Kid

How about now?




Modified by Bulli Kid at 6:45 PM 1/19/2008

fcm

No, I meant the link to the LOC... http://www.crutchfield.com/S-n....html 94

Bulli Kid

http://www.crutchfield.com/App...=2001