I have a pioneer Deh-6000ub but I dont know where to connect the power antenna wire to. The Pioneer harness only has a blue/white wire(System Remote Control). No solid blue wire for power antenna signal.
I only want the antenna to stay up when I listen to the radio occasionally but not up when listening to a cd or ipod. I had a Alpine cde-7858 and it had a power antenna wire and the antenna would only come up if the radio was on. Is there any way I can wire it to do the same with the pioneer?
I had a Pioneer head unit and it was wired so it would only come on when the radio was on. That is how I wanted it. I now have a different integra and a Sony Head unit. It now is wired on so the Power Antenna comes up whenever the radio is powered on. LAME.
Anyone know how to wire it so it comes on when I switch the radio on?
Use the system remote control lead, blue/white, connect to 1A on/off switch and connect power ant. control lead, [ant. side] to other side of switch, then you can keep ant. down when not using the radio. or get a HU with an ant. control output lead, only two ways I can think of doing it other then paying a technician to add an ant. control output lead to the HU you have, [probably cost more then to replace the HU]. 94
RIP Zack 2001-2013, my best friend.
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.