How to wire bridged stereo mode??
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2002
Location: aroundtheworld, inaday, usa
Posts: 1,898
Likes: 0
Received 1 Like
on
1 Post
How to wire bridged stereo mode??
My current amp says 2ohm stable bridged stereo mode or at least that is what they car stereo shop told me when I got it many, many years ago. I am gonna hook up a DVC 10" to it that has dual 4ohm vc. I wired it for 2 ohms, but before I go blowing fuses or worse, how do I configure my amp for bridged stereo mode?? Should I just move the selector to stereo and bridge it?
#3
Honda-Tech Member
Thread Starter
Join Date: Mar 2002
Location: aroundtheworld, inaday, usa
Posts: 1,898
Likes: 0
Received 1 Like
on
1 Post
Re: How to wire bridged stereo mode?? (IROSOLO)
really old Alpine, I think it is 3542. Do I just bridge to two channels and then switch the selector to stereo?
#4
Old Fart
Join Date: May 2004
Location: kelowna, bc, canada
Posts: 26,173
Likes: 0
Received 14 Likes
on
14 Posts
Re: How to wire bridged stereo mode?? (technine)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by technine »</TD></TR><TR><TD CLASS="quote">really old Alpine, I think it is 3542. Do I just bridge to two channels and then switch the selector to stereo?</TD></TR></TABLE>Your amp is not stable at 2ohms when bridged, in stereo yes, 60watts rms x 2 into 4ohms, 80watts rms x 2 into 2ohms or 160 watts rms x 1 into 4 ohms. The input mode switch has to be set on L+H if you are bridging and have both RCAs plugged in, if the switch is in the L(mono) position, the speaker output must be bridged and you can plug a RCA into the left RCA input only, [this was so you could use two of the amps, one for left and the other for right] DO NOT use the L(mono) any other way
This is not the amp to use for the subs you have, wiring it to a 2ohm load will only damage it, or at the least trip the thermo switch 94
This is not the amp to use for the subs you have, wiring it to a 2ohm load will only damage it, or at the least trip the thermo switch 94
#5
Honda-Tech Member
Thread Starter
Join Date: Mar 2002
Location: aroundtheworld, inaday, usa
Posts: 1,898
Likes: 0
Received 1 Like
on
1 Post
Re: How to wire bridged stereo mode?? (fcm)
Thanks fcm. I was thinking the guy might've ment just hooking it up in stereo mode. Maybe I was just thinking I heard "bridged stereo mode" when he actually said stereo mode.
#7
Old Fart
Join Date: May 2004
Location: kelowna, bc, canada
Posts: 26,173
Likes: 0
Received 14 Likes
on
14 Posts
Re: How to wire bridged stereo mode?? (technine)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by technine »</TD></TR><TR><TD CLASS="quote">Thanks fcm. I was thinking the guy might've ment just hooking it up in stereo mode. Maybe I was just thinking I heard "bridged stereo mode" when he actually said stereo mode. </TD></TR></TABLE>YW, in it's day it was a top rated amp, it still walks all over most amps of the same wattage today. 94
Thread
Thread Starter
Forum
Replies
Last Post
boostincoupe
Audio / Security / Video
5
02-08-2006 06:39 PM
matto2413
Audio / Security / Video
7
09-12-2005 12:14 PM