Re: How to enter programming for Black Widow Alarm? Losing my mind...
To place a B/W alarm into valet it is turn ign. on and HOLD valet button for about 5 seconds the siren will chirp 5 times when entering valet mode and twice when exiting valet mode.
For programing you need a model number, B/W uses diff. systems for programming even the one where you turn ign. on and within 5 sec. press and release the valet button 5 times, will not help as the next step is to press and release the valet button the number of times corresponding with the feature you want to program, arming mode is is not always in the same spot, EG; on the 3650 it is feature 2, on the 2150 it is feature 1, on the 3150 it is a dip switch, [switch #4] and so on.
Even if you get into programming mode you have no way of knowing what feature # you need to program, however if it will not go into program mode you may have a model that uses dip switches for programing, Either way you will need to get to the alarm brain to get the model number. 94
RIP Zack 2001-2013, my best friend.