00 Civic si radio into a 95 coupe
06-06-2007, 02:04 PM
#2
Honda-Tech Member
iTrader: (1)
Join Date: Oct 2005
Location: 99 probs but a stolen car aint 1, ca, cerritos/fullerton
Posts: 9,716
Likes: 0
Received 3 Likes
on
3 Posts
Re: 00 Civic si radio into a 95 coupe (nastynutsnash)
yes, depending on the year. You might need a reverse harness. why would you want to go stock?
06-06-2007, 02:25 PM
#4
Honda-Tech Member
iTrader: (1)
Join Date: Oct 2005
Location: 99 probs but a stolen car aint 1, ca, cerritos/fullerton
Posts: 9,716
Likes: 0
Received 3 Likes
on
3 Posts
Re: 00 Civic si radio into a 95 coupe (nastynutsnash)
what year is the new radio from. If its a 99 si your going to need a harness for that radio and the harness for your car.
06-06-2007, 07:59 PM
#5
Honda-Tech Member
Join Date: Jul 2003
Location: Vancouver, WA, US
Posts: 2,290
Likes: 0
Received 0 Likes
on
0 Posts
Re: 00 Civic si radio into a 95 coupe (wrx-killer-Sti eater)
youre gonna need the male plug from the 99-00 civic dash harness. its a blue plug thats more square compared to your rectangular 95 civic plug.
06-07-2007, 09:10 AM
#6
Honda-Tech Member
To be more specific, you'll need a 71-1721 harness to plug into the new radio and a 70-1720 harness to plug into your vehicle's wiring...
Wire the two harnesses together, matching color to color, and it'll be plug & play.
Wire the two harnesses together, matching color to color, and it'll be plug & play.
06-07-2007, 11:45 AM
#7
Old Fart
Join Date: May 2004
Location: kelowna, bc, canada
Posts: 26,173
Likes: 0
Received 14 Likes
on
14 Posts
Re: 00 Civic si radio into a 95 coupe (nastynutsnash)
The mounting of the 2 units is diff. and so is the face trim.
The 00 Civics unit uses an ISO mounting system, 8mm machine screws through a bracket into the sides of the unit, your car uses a rear mount, 8mm machine screws through a bracket into a lip that sticks out the bottom of the unit.
The above is not to say it can't be done, this may help... http://www.installdr.com/Insta....html
94
The 00 Civics unit uses an ISO mounting system, 8mm machine screws through a bracket into the sides of the unit, your car uses a rear mount, 8mm machine screws through a bracket into a lip that sticks out the bottom of the unit.
The above is not to say it can't be done, this may help... http://www.installdr.com/Insta....html
94
Thread
Thread Starter
Forum
Replies
Last Post
hmtcrxsir
Honda Civic / Del Sol (1992 - 2000)
18
10-29-2007 04:32 PM
