prabhakarglv

Hi,

I need you guys help in starting my car using the remote starter. My car is cranking with the remote starter command, but not starting. I'm using FORTIN EVO-ALL Bypass module and Austostart AS2381TW-FM Remote starter.

Intially I tried to start the car with remote starter using Data cable and Virtual Tach learn, but NO SUCCESS except cranking of engine. So I did the hard wiring method by cutting the BLUE and WHITE wires of Data cable (Red and black wires are intact) and I did the hard wiring from the bypass module to remote starter wires of LOCK, UNLOCK, TRUNK WIRE, BRAKE WIRE AND TACH WIRE. I connected the TACH WIRE of Fortin Evo-all Bypass module and AS2381TW-FM Remote starter TO BROWN wire of fuel injector (The Directed Tech Guy also recommended that wire) and did the Multi-Speed Tach Program. So I'm not sure is this still do with the Bypass module OR anything to do with the Tach. If I leave the key the key in Ignition (key in off position) it's starting without any issue with remote starter command.

If nothing works I want to change the Fortin bypass module to Xpresskit bypass module (recommended to this AS2381TW-FM Remote Starter).

Any suggesstions???....

THANKS.....

Pubby.