Autopage 730 remote wont program...
#1
Autopage 730 remote wont program...
To all alarm gurus familiar with autopage alarms i can use your help. I just recently installed my autopage rs730 two way alarm with remote start. My problem is i can't program my remote. I followed the instructions to the "T". "turn key to on position 3 times and leave on, then press valet button 2 times and hold on 2nd. I hear the chirp to let me know its is programing stage and instructions state hold down any key to till alarm confirms with a chirp. I only end up hearing the 3 chirps stating its exiting the program mode. I test the remote and I get "out of range". I also held the remote right next to the antenna and unplugged and plugged it back in. I've tried resetting the alarm via valet button programming and also disconnecting the battery to reset it. And remote still says out of range. Any help will do. Thanks ht peeps!
#2
Re: Autopage 730 remote wont program...
Hey i'm hoping you can help me out. I'm having the same exact problem with my alarm I just hooked up. If you figured out what the problem was with programming your remote please let me know how to fix it...I don't know what else to try. If you can help at all please e-mail me at GT35_turbo_SI@hotmail.com Any info appreciated Thanks
Thread
Thread Starter
Forum
Replies
Last Post
itsJDMyo
Audio / Security / Video
8
05-14-2011 08:52 AM