Alarm Install on integra 1994
08-20-2006, 07:52 AM
#1
Honda-Tech Member
Thread Starter
Join Date: May 2006
Posts: 870
Likes: 0
Received 0 Likes
on
0 Posts
Alarm Install on integra 1994
Hey, alright I have a black widow alarm system that I am trying to install in my integra, and I was wondering if I slice the black/yellow wire or the black/white wire? Also I wired up the door locks and it seemed to only unlock and not lock, but I sliced into the black/white wire, I need help to install this alarm any help will be great thanks
08-20-2006, 08:00 AM
#2
Honda-Tech Member
Re: Alarm Install on integra 1994 (4drlsintegra)
Does your car have cruise control? If it does the lock/unlock wires are behind the cruise control module on the drivers side kick panel. The wires are black/red and black/white. The black yellow wire is the ignition wire and the black/white the starter wire. You cut the black/white to do the starter kill.Or you can do an ignition kill. It's up to you.
08-20-2006, 08:07 AM
#3
Honda-Tech Member
Thread Starter
Join Date: May 2006
Posts: 870
Likes: 0
Received 0 Likes
on
0 Posts
Re: Alarm Install on integra 1994 (SiRGDC)
DAMNIT! I wish I went with the black/white, Not I have to cut wires put together, Also YES, I wired up the unlock/lock wires right also, but i dont know what happened
08-21-2006, 05:00 PM
#5
Honda-Tech Member
Re: Alarm Install on integra 1994 (4drlsintegra)
What are you bumping for?!
If you already cut the black/yellow, just use that. Only bad thing about it is that if you keep cranking on your motor when the alarm is going off, you'll be dumping fuel.
If you already cut the black/yellow, just use that. Only bad thing about it is that if you keep cranking on your motor when the alarm is going off, you'll be dumping fuel.
08-21-2006, 10:26 PM
#6
Honda-Tech Member
Thread Starter
Join Date: May 2006
Posts: 870
Likes: 0
Received 0 Likes
on
0 Posts
Re: Alarm Install on integra 1994 (suspendedHatch)
lol, i mean I have more problems, I cut the black/white wire now, but I still have a problem with the lock/unlock, it seems to ONLY Unlock, even if I arm the car, and I still have my old factory alarm but took the brain out, mayb the wires have something to do with this?
08-22-2006, 12:49 AM
#7
Honda-Tech Member
Thread Starter
Join Date: May 2006
Posts: 870
Likes: 0
Received 0 Likes
on
0 Posts
Re: Alarm Install on integra 1994 (4drlsintegra)
alright, I got the unlock/lock wires all figured out. but now, my car starts even if the alarm has been armed and if it goes off I can still start the car, any help would be great
Trending Topics
08-22-2006, 02:10 AM
#8
Thread
Thread Starter
Forum
Replies
Last Post
Azxster
Audio / Security / Video
3
03-26-2006 09:20 AM
