Alarm install Help
#1
Junior Member
Thread Starter
Join Date: May 2006
Location: 626, ca, 91770
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Alarm install Help
I just bought a 95 ej as a Daily Driver and my friend gave me a new Crimestopper CS-2000 DP II Series IV alarm. Well i installed it today and every thing is working except the LED light. Does anyone know what could be wrong? I tested it with another led and it still don't work. The only wire that i didn't connect is in red
any info would be appreciated...
any info would be appreciated...
#2
O.G. triple O.G.
Re: Alarm install Help (ug1yu)
I have installed that particular alarm before. Hrrmm, does the alarm work at all...meaning the chirp comes on and the doors lock/unlock, etc..? The red wire you are referring to is just for the door lock/unlock relay (if needed). That has nothing to do with the LED not working. Make sure all your connections are good and that the LED plug is firmly in the alarm brain module.
Modified by NVturbo at 9:32 PM 1/12/2008
Modified by NVturbo at 9:32 PM 1/12/2008
#6
O.G. triple O.G.
Re: Alarm install Help (CarbonizedDX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CarbonizedDX »</TD></TR><TR><TD CLASS="quote">have you tried the led wired up the opposite way? might have been wired backwards...</TD></TR></TABLE>There is no way you can wire the LED incorrectly unless you jam the plug into the module.
#7
Honda-Tech Member
Join Date: Jun 2004
Location: Seattle
Posts: 6,416
Likes: 0
Received 0 Likes
on
0 Posts
Re: Alarm install Help (NVturbo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NVturbo »</TD></TR><TR><TD CLASS="quote">
There is no way you can wire the LED incorrectly unless you jam the plug into the module.</TD></TR></TABLE>
Um. Yes there is.
On EVERY alarm I install I cut the wires about 4 inches from the actual led and then flush mount and hot glue it to whatever panel I'm installing it in. I put one male and one female spade on each line, that way said panel can be removed if something needs service.
So yeah, it's possible, but no, not probable.
There is no way you can wire the LED incorrectly unless you jam the plug into the module.</TD></TR></TABLE>
Um. Yes there is.
On EVERY alarm I install I cut the wires about 4 inches from the actual led and then flush mount and hot glue it to whatever panel I'm installing it in. I put one male and one female spade on each line, that way said panel can be removed if something needs service.
So yeah, it's possible, but no, not probable.
Trending Topics
#8
Old Fart
Join Date: May 2004
Location: kelowna, bc, canada
Posts: 26,173
Likes: 0
Received 14 Likes
on
14 Posts
Re: Alarm install Help (NVturbo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 8520 »</TD></TR><TR><TD CLASS="quote">
Um. Yes there is.
On EVERY alarm I install I cut the wires about 4 inches from the actual led and then flush mount and hot glue it to whatever panel I'm installing it in. I put one male and one female spade on each line, that way said panel can be removed if something needs service.
So yeah, it's possible, but no, not probable. </TD></TR></TABLE> Ditto that^^^^
Also I have had a few "mis-pined" LED plugs over the years, and to find one on a Crimestopper would not surprise me, even a little. 94
Um. Yes there is.
On EVERY alarm I install I cut the wires about 4 inches from the actual led and then flush mount and hot glue it to whatever panel I'm installing it in. I put one male and one female spade on each line, that way said panel can be removed if something needs service.
So yeah, it's possible, but no, not probable. </TD></TR></TABLE> Ditto that^^^^
Also I have had a few "mis-pined" LED plugs over the years, and to find one on a Crimestopper would not surprise me, even a little. 94
Thread
Thread Starter
Forum
Replies
Last Post
tekstyle
Audio / Security / Video
5
04-18-2008 12:24 PM
byronl
Audio / Security / Video
12
03-27-2008 01:51 PM