vybez

i am in the process of upgrading my single disc radio for the 6 disc radio in my accord lx-p. the reason i am doing this upgrade so i can install a after market gps/navigation add-on since it is not compatable with the accord lx/lx-p single disc radio.. so far i have purchase the ex wire harness from honda and purchase the 6disc factory radio off ebay. however, i did install the radio with the new harness it powers on radio part works also shows the rds info.. 6 disc works but does not display the cd txt or mp3 txt.. the illumination light for the buttons does not work but when i run the test the buttons will light up.. also when i press menu button to try adjust the speaker zone i get this message on the display screen EXT... and i don't have any menu option .. also when i run the speaker test all speakers work .. all the diagnostic test pass except the air speed but when i try use the radio like it should those 3 functions does not work.. any suggestions.. also i believe there is some difference in wireing for the 2 cars so if anybody have a clue or know the difference between the harness please let me know or how to make this swap a success..and yeah i have already order the navi kit add on...

Parts:
wire harness:
32118-TA0-A00 LX <-- does not support after martket kit
32118-TA0-A10 LX-P <-- my current harness "does not support after martket kit"
32118-TA0-A20 EX <-- i purchase this one to replace the lx-p harness
32118-TA0-A30 EX-L <-- does not support after martket kit
32118-TA0-A40 EX-L NAVI
6 disc radio:
39171-TA0-A32 OR A31

vybez

http://www.autodvdgps.com/aftermarke...8bio8v34lhu802
aftermarket gps/navi add on

Bpearl2010

Invalid Link..

Also this has been on Driveaccord, but they were having the same issues your having NO Fix to this date..

vybez

yeah it was my post i was hoping someone might know somehting however this weekend i will know for sure if rewiring the ex harness to resolve the issue

Bpearl2010

ooo well.. haha.. Hopefully your able to figure out wazup

GoLowDrew

Want this moved to the Audio section?

vybez

sure if it will benefit the cause

vybez

i got everything to work..the 6 dics radio is a can bus radio so i had to splice into the can bus wire located in in the passenger side fuse box ..the display screen was user error i used my old display screen on a different radio which obviously display wrong info..so the swap can be done and everything works perfect