Hooking up a sub...
#1
Honda-Tech Member
Thread Starter
Hooking up a sub...
Hi, i am going to be putting a system in my car soon. Since they're leased i cant drill a hole through the firewall... Theres 2 scenarios to this - My first car is an Audi A4 (2001, no standard sub) Is there anyway i can wire **** without going throught the firewall? Second is an 2003 Acura TL ( comes with a factory installed sub) for this one can i just add a sub to this existing hookup? Sorry, im a total noob when it comes to car audio.
#2
Re: Hooking up a sub... (Beb Rox!)
1st: you dont have to drill a hole in the firewall to run wire, there should be plenty of spots to sneak in some wire.
2nd: the new sub your going to put is going to require another amp since the factory one will not have enough power.
i do systems all the time and i never have to drill unless they want the amps screwed into the seats.
2nd: the new sub your going to put is going to require another amp since the factory one will not have enough power.
i do systems all the time and i never have to drill unless they want the amps screwed into the seats.
#3
Honda-Tech Member
Thread Starter
Re: Hooking up a sub... (IVI)
oh cool, its just that i dont know **** about this and a guy i know who works for circuit city told me there probably wasnt enough space to sneak a wire through or something... thanks
#4
Re: Hooking up a sub... (Beb Rox!)
there will be enough room, there are plenty of wires that go through the firewall to get to the fusebox / battery etc. use a hanger but bend the tip so it cant snag and cut any wires so you can run the wires you need.
Thread
Thread Starter
Forum
Replies
Last Post
kranked91dx
Audio / Security / Video
3
01-24-2002 03:50 PM