0 db and +3db button on infinity 6022 6.5"
#1
Senior Member
Thread Starter
Join Date: Dec 2006
Location: by a lake
Posts: 1,347
Likes: 0
Received 0 Likes
on
0 Posts
0 db and +3db button on infinity 6022 6.5"
what does this mean and what do you reccommend, pushing it in to the +3db position? they are 6.5's on a 92 civic i need help asap before i put the door panel back on.
#2
Old Fart
Join Date: May 2004
Location: kelowna, bc, canada
Posts: 26,173
Likes: 0
Received 14 Likes
on
14 Posts
Re: 0 db and +3db button on infinity 6022 6.5" (allricedout)
I will increase the output of the tweeter by 3dB...
• Tweeter level adjustment - The 6022i also features a tweeter level adjustment located on the front of the speaker and can be set at the reference level of 0dB. If the speakers are located low in the doors or if you are looking for a brighter sound, set the tweeter at +3dB. The same goes for the 6022si. 94
• Tweeter level adjustment - The 6022i also features a tweeter level adjustment located on the front of the speaker and can be set at the reference level of 0dB. If the speakers are located low in the doors or if you are looking for a brighter sound, set the tweeter at +3dB. The same goes for the 6022si. 94
#3
Senior Member
Thread Starter
Join Date: Dec 2006
Location: by a lake
Posts: 1,347
Likes: 0
Received 0 Likes
on
0 Posts
Re: 0 db and +3db button on infinity 6022 6.5" (fcm)
thanks i pushed the button in to the +3 db setting, i need all the fine tweeter sound i can get because i just have two of these and the rest of my car is gutted, all in all it sounds good with a decent amount of bass.... the worker at best buy showed me how these infinitys outperform other brands by a huge margin.... all in all i am satisfied with my 120$ spent on these, anyways thanks.
o yeah and what does "db" stand for exactly? or is it just a frequency?
o yeah and what does "db" stand for exactly? or is it just a frequency?
#5
Honda-Tech Member
Join Date: Jun 2006
Location: Williamstown, NJ, 08094
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
Re: (B18C_EJ8)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18C_EJ8 »</TD></TR><TR><TD CLASS="quote">^^ DB stands for decibels... A unit of sound level measurement. </TD></TR></TABLE>
actually it is a unitless measurement, it's a ratio. However most acoustic and electronics use this unit for measurements ie dBA, dBV, dBW, SPL, etc.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fcm »</TD></TR><TR><TD CLASS="quote"> I will increase the output of the tweeter by 3dB...
• Tweeter level adjustment - The 6022i also features a tweeter level adjustment located on the front of the speaker and can be set at the reference level of 0dB. If the speakers are located low in the doors or if you are looking for a brighter sound, set the tweeter at +3dB. The same goes for the 6022si. 94</TD></TR></TABLE>
correct, it will increase the apparent sound of the tweeter output
actually it is a unitless measurement, it's a ratio. However most acoustic and electronics use this unit for measurements ie dBA, dBV, dBW, SPL, etc.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fcm »</TD></TR><TR><TD CLASS="quote"> I will increase the output of the tweeter by 3dB...
• Tweeter level adjustment - The 6022i also features a tweeter level adjustment located on the front of the speaker and can be set at the reference level of 0dB. If the speakers are located low in the doors or if you are looking for a brighter sound, set the tweeter at +3dB. The same goes for the 6022si. 94</TD></TR></TABLE>
correct, it will increase the apparent sound of the tweeter output
#6
Honda-Tech Member
Re: 0 db and +3db button on infinity 6022 6.5" (allricedout)
3db is considered to be the smallest amount of change in volume that is detectable.
I always leave it at 0 and depend on the crossover adjustments primarily and then fall back on the equalizer. Infinity's are already bright as it is.
I always leave it at 0 and depend on the crossover adjustments primarily and then fall back on the equalizer. Infinity's are already bright as it is.
#7
Senior Member
Thread Starter
Join Date: Dec 2006
Location: by a lake
Posts: 1,347
Likes: 0
Received 0 Likes
on
0 Posts
Re: 0 db and +3db button on infinity 6022 6.5" (suspendedHatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by suspendedHatch »</TD></TR><TR><TD CLASS="quote">3db is considered to be the smallest amount of change in volume that is detectable.
I always leave it at 0 and depend on the crossover adjustments primarily and then fall back on the equalizer. Infinity's are already bright as it is.</TD></TR></TABLE>
yeah, i was thinking of leaving them in the 0 db position and using my alpine head unit to fine tune it from there... i can access the tiny button through the vents in the speaker vents in the door panel with a feeler guage or something similar.
I always leave it at 0 and depend on the crossover adjustments primarily and then fall back on the equalizer. Infinity's are already bright as it is.</TD></TR></TABLE>
yeah, i was thinking of leaving them in the 0 db position and using my alpine head unit to fine tune it from there... i can access the tiny button through the vents in the speaker vents in the door panel with a feeler guage or something similar.
Thread
Thread Starter
Forum
Replies
Last Post
hi ho silver
Audio / Security / Video
2
06-14-2010 07:45 AM