Need An Integra With More Horsepower Than A New Z06? Of Course You Do!
This One Has A Few Different Stages For Its Turbo Set Up, And Even Dialed Back, It’s Still Making 450 Horsepower
It seems to be easier than ever to make horsepower these days out of a GSR block, and one Integra owner from the mid-west has pushed that number all the way to an astonishing 688 horsepower. A second attempt using e85, also yielded about 650 horsepower. Granted, that shows the engine’s potential, but when you’re driving a car like this on the street, you’ll dial it back a bit.
Even in a more modest tune using 93 octane pump gas, it still soars well past the 400hp mark, with an estimated 450 with 14psi of push.
So what backs up all that power? I’d almost run out of space listing all the mods here, but the most important are, the base GSR block which has been sleeved, Skunk2 Pro 1 cams, 4 piston CNC GSR with matched Skunk2 Pro Series Ultra Intake. On the turbo side of things, a mini ram horn manifold sends exhaust to a T3/T04s turbo which can run 14psi on gas and 28psi on the corn fuel. A custom down pipe and exhaust finish things off.
It’s a bit on the pricey side, especially for the interior being a bit rough, but the owner promises that all components are of high quality and put together right. Considering the numbers, we can trust that.
Chime in with your thoughts on the forum. >>
