Warturtle 2.0 south florida build
#1
Honda-Tech Member
Thread Starter
Warturtle 2.0 south florida build
Sup guys welcome to my build thread,ill be posting pics of my hatch as i build it,its a simple k series build "full k20z1" with tastefull mods.. .my last build:
NWP4LIFE: 2.0 midori build
had alot of fun with that car,it was really the first car I can say I build,I went through the whole phase of growing out of these cars so i went ahead and listed the car for sale or trade,ended up getting a tsx witch was comftorable but boring to drive,I looked around for shells but couldnt find anything clean,I messed up and traded the tsx for an rsx that ended up being a huge pos,sold that quickly..At that point I wasnt happy with a car like i was with my midori so i went after the car i wanted for a while witch was an s2000
,picked that up and drove that around for year and the whole time I was still itching to build another car,not so much the s2000 so I ended up selling it,got a nice penny for it,paid some debts and got straight to the drawing board,I found an acura integra to daily and next was a clean eg hatch shell to build up...I live in south florida so these cars go like hot cakes,i ended up getting the full swap and most of the parts before I had the shell....After searching for nearly 2 months I finnally found the one,It came with no wheels so i put on some rotas i had laying around.
day 1 november 14th
got her home
my motor and transmission,2006 k20z1 31k miles picked up oct 28th
I immediatley began adding my parts to it,oem floor mats from afhparts
Primo Banner
racekar and daily
picked up some muteki lugs and skunk2 coilovers from jhp
rbc manifold,hondata gasket from kseriesparts
ran the oem box mounted with the rcrew shift plate
oem honda radio delete
picked up one of my fav wheels of all time,vertex 10star
cockpit
removed the dash to take out all ac components since i was not planning on running ac
ktuned conversion harness routed
cut the center council to run my cables
before pic of the interior,ill post after shot later
old vs new,the nuespeeds are going on my daily
picked up some wilwood brakes with rotors and steel lines for a price i couldnt sleep on
what my parts pile looked like at one point
innovative mounts
3" ktuned turn down muffler
eg6 headlights
rbc manifold cut for z1 head
karcepts ac ps delete
manifold,fuel setup,ac ps delete mounts
drilled the factory tranny bracket off
touched up some spots on the bay
my buddies helping me put the motor in
amazing feeling
new engine bay hardware,was never a fan of allan heads so i got oem style zinc plate bolts
engine harness being put on
how she currently sits as i save up for parts,still have alot more to do ,ill update when I work on her,thanks for viewing
NWP4LIFE: 2.0 midori build
had alot of fun with that car,it was really the first car I can say I build,I went through the whole phase of growing out of these cars so i went ahead and listed the car for sale or trade,ended up getting a tsx witch was comftorable but boring to drive,I looked around for shells but couldnt find anything clean,I messed up and traded the tsx for an rsx that ended up being a huge pos,sold that quickly..At that point I wasnt happy with a car like i was with my midori so i went after the car i wanted for a while witch was an s2000
,picked that up and drove that around for year and the whole time I was still itching to build another car,not so much the s2000 so I ended up selling it,got a nice penny for it,paid some debts and got straight to the drawing board,I found an acura integra to daily and next was a clean eg hatch shell to build up...I live in south florida so these cars go like hot cakes,i ended up getting the full swap and most of the parts before I had the shell....After searching for nearly 2 months I finnally found the one,It came with no wheels so i put on some rotas i had laying around.
day 1 november 14th
got her home
my motor and transmission,2006 k20z1 31k miles picked up oct 28th
I immediatley began adding my parts to it,oem floor mats from afhparts
Primo Banner
racekar and daily
picked up some muteki lugs and skunk2 coilovers from jhp
rbc manifold,hondata gasket from kseriesparts
ran the oem box mounted with the rcrew shift plate
oem honda radio delete
picked up one of my fav wheels of all time,vertex 10star
cockpit
removed the dash to take out all ac components since i was not planning on running ac
ktuned conversion harness routed
cut the center council to run my cables
before pic of the interior,ill post after shot later
old vs new,the nuespeeds are going on my daily
picked up some wilwood brakes with rotors and steel lines for a price i couldnt sleep on
what my parts pile looked like at one point
innovative mounts
3" ktuned turn down muffler
eg6 headlights
rbc manifold cut for z1 head
karcepts ac ps delete
manifold,fuel setup,ac ps delete mounts
drilled the factory tranny bracket off
touched up some spots on the bay
my buddies helping me put the motor in
amazing feeling
new engine bay hardware,was never a fan of allan heads so i got oem style zinc plate bolts
engine harness being put on
how she currently sits as i save up for parts,still have alot more to do ,ill update when I work on her,thanks for viewing
Last edited by 561teggy; 11-29-2014 at 05:18 AM.
Trending Topics
#8
Honda-Tech Member
Thread Starter
#13
Honda-Tech Member
Thread Starter
Re: Warturtle 2.0 south florida build
update**
re-routed my fuel lines
ended up pulling my manifold and sold it,waiting on my new one to come in
picked up a jsracing tow hook and oem hood bra
re-routed my fuel lines
ended up pulling my manifold and sold it,waiting on my new one to come in
picked up a jsracing tow hook and oem hood bra
#21
#25
Honda-Tech Member
Thread Starter
Re: Warturtle 2.0 south florida build
had to cut the bumper support due to my intake
back on,also got my custom hot version plate #jdmfanboy
back on,also got my custom hot version plate #jdmfanboy