Warturtle 2.0 south florida build
05-10-2015, 04:19 AM
#53
Honda-Tech Member
Thread Starter
Re: Warturtle 2.0 south florida build
finnally got her running, gotta weld the megaphone to the header,adjust toe and shes ready for a tune
12-06-2015, 07:26 PM
#61
Honda-Tech Member
Thread Starter
Re: Warturtle 2.0 south florida build
update
re did all the bushings up front with hardrace,replaced ball joints, wheel bearing,wheel studs, also swapped my header out, installed ktuned box and cables and mounted my tires,shes mobile now,going to be tuning in a few weeks
top new bottom old
15x8 gramlight 57dr +35 nitto nt01 225 45 15
re did all the bushings up front with hardrace,replaced ball joints, wheel bearing,wheel studs, also swapped my header out, installed ktuned box and cables and mounted my tires,shes mobile now,going to be tuning in a few weeks
top new bottom old
15x8 gramlight 57dr +35 nitto nt01 225 45 15
05-30-2016, 08:42 AM
#65
Honda-Tech Member
Thread Starter
Re: Warturtle 2.0 south florida build
havent updated in a while
picked up white te37 wheels and speed factory turn down muffler.
scooped an ultrashield aluminum bucket seat, ended up making brackets to fit
i can never keep a set of wheels, picked up 15x8 +28 rpf1, put my 225 45 nt01's on. Also sourced an authentic mugen front lip, bought it pretty damaged and got it repaired.
SiR cluster
retuned the car, blue was with plm 4-1 header with megaphone, open header, red is skunk2 megapower 4-2-1 with full exhaust, mid range picked up nice. setup is :
2006 k20z1 motor and trans
ported rbc manifold
70mm throttle body
allinfab 3-4" intake
fic 775 incjectors
e85 gas
walbaro 450 pump
4-2-1 skunk2 header
full 3" exhaust
kpro
im pursuing to get more competetive with the car, picked up a k24a4 block that i will slowly be building, also purchased 23" slicks with 13x8 wheels so i will be testing the car out soon, hopefully i can reach high 11s
picked up white te37 wheels and speed factory turn down muffler.
scooped an ultrashield aluminum bucket seat, ended up making brackets to fit
i can never keep a set of wheels, picked up 15x8 +28 rpf1, put my 225 45 nt01's on. Also sourced an authentic mugen front lip, bought it pretty damaged and got it repaired.
SiR cluster
retuned the car, blue was with plm 4-1 header with megaphone, open header, red is skunk2 megapower 4-2-1 with full exhaust, mid range picked up nice. setup is :
2006 k20z1 motor and trans
ported rbc manifold
70mm throttle body
allinfab 3-4" intake
fic 775 incjectors
e85 gas
walbaro 450 pump
4-2-1 skunk2 header
full 3" exhaust
kpro
im pursuing to get more competetive with the car, picked up a k24a4 block that i will slowly be building, also purchased 23" slicks with 13x8 wheels so i will be testing the car out soon, hopefully i can reach high 11s
Thread
Thread Starter
Forum
Replies
Last Post
Gearspeed-Performance
Road Racing / Autocross & Time Attack
8
02-24-2014 10:38 AM