prelude 86 GS-R swap
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2009
Location: San Jose Costa Rica
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
prelude 86 GS-R swap
well this prelude was a kicker that a customer left behind in my shop in CR by the way the name of my shop is RyR motorsports and if you ever come to CR your more than welcome to stop by, ok back to the thread this ET-2 chasis code project took me about 3 months to develope.
this is the pic when we presented the the B-series engine to the prelude engine bay and it was good.
well you can guess that I did make my own rowsport mounts sword of like hasport but mine are better cause I made them.
this is the pic when we presented the the B-series engine to the prelude engine bay and it was good.
well you can guess that I did make my own rowsport mounts sword of like hasport but mine are better cause I made them.
#6
Honda-Tech Member
Thread Starter
Join Date: Sep 2009
Location: San Jose Costa Rica
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
Re: prelude 86 GS-R swap
so it was good we took to the track and it ran 14.9 with no tunning and regular radials the gearbox was a 4.4 with LSD It was crazy project and unusual but what hell all for the sake of the older vintage prelude fans till then.
Trending Topics
#24
Honda-Tech Member
Thread Starter
Join Date: Sep 2009
Location: San Jose Costa Rica
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
Re: prelude 86 GS-R swap
we went with OBD1 wiring(yes we made our own rowsport wiringharness jajajaja) and P30 ecu and the axels we used where of an 86 integra we had to change the the wheel hubs and use the integra ones as well hope this ifo is help full