Kid-Vtek's EK build "lets try this again"
#151
Re: Kid-Vtek's EK build "lets try this again"
I'm in Vancouver B.C.
I like your mock up of you custom CAI/Airbox.
Mine has a short ram installed, & I want to try to fab up something too.
I like your mock up of you custom CAI/Airbox.
Mine has a short ram installed, & I want to try to fab up something too.
#153
Honda-Tech Member
Re: Kid-Vtek's EK build "lets try this again"
So sorry for what happened with the original car!! That is nuts!! Thats why I did everything on my build myself. If you want it done right and to your standards, do it yourself! It took me 10x longer to do my body then most people that send their car off to a body shop, but now that my car is back together, I couldn't be happier. And the feeling of accomplishment to know I build my entire car myself to my standards is something that can't be bought. Besides, all the things I learned along the way(which sometimes meant doing it wrong the first time and learning from my mistakes) was so worth it.
Good luck and I hope the rest of the build goes well. Car will be a beast!
Good luck and I hope the rest of the build goes well. Car will be a beast!
#154
Honda-Tech Member
Thread Starter
Join Date: Jan 2012
Location: Calgary, AB, Canada
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Re: Kid-Vtek's EK build "lets try this again"
wow very cool build, definently gonna keep an eye on that
Finished installing my rear extended wheel studs... unfortunately Hondas are built to rust so most of the bolts rounded off which meant i had to pull the whole rear trailing arms off to get them off.
Also i was finalizing the fitment on my Intercooler piping... or lack there of. the piping that came with the Full Race kit was terrible! Almost contact the right wheel and does not clear the bumper when installed, which led to this
I decided to remake the intercooler piping in 3" instead of 2.5". Let the pie cuts commence
37 pie cuts later heres what i got tacked together. I am extremeley happy with how it turned out. Got rid of the multiple silicone coupler connections and replaced them with a single pipe and two boost clamps. Old VS New
My ducted head light will be in next week so hopefully i can finish my air box then i can begin the exhaust system and finally get her running! stay tuned
Finished installing my rear extended wheel studs... unfortunately Hondas are built to rust so most of the bolts rounded off which meant i had to pull the whole rear trailing arms off to get them off.
Also i was finalizing the fitment on my Intercooler piping... or lack there of. the piping that came with the Full Race kit was terrible! Almost contact the right wheel and does not clear the bumper when installed, which led to this
I decided to remake the intercooler piping in 3" instead of 2.5". Let the pie cuts commence
37 pie cuts later heres what i got tacked together. I am extremeley happy with how it turned out. Got rid of the multiple silicone coupler connections and replaced them with a single pipe and two boost clamps. Old VS New
My ducted head light will be in next week so hopefully i can finish my air box then i can begin the exhaust system and finally get her running! stay tuned
#157
Honda-Tech Member
Thread Starter
Join Date: Jan 2012
Location: Calgary, AB, Canada
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Re: Kid-Vtek's EK build "lets try this again"
Thanks guys! My carbon fiber headlight came in today.... now hopefully UPS doesn't screw me with the delivery lol if I get it I'll be fabing up my turbo inlet, I bought some 4" titanium tubing so the pipe feeding the turbo from the air box will be in titanium. Welding the pie cuts for this section of tubing will interesting to say the least haha
#159
Honda-Tech Member
Thread Starter
Join Date: Jan 2012
Location: Calgary, AB, Canada
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Re: Kid-Vtek's EK build "lets try this again"
Password:JDM Dry Carbon Fiber Ram Air Scoop (EK 99-00 Civic) | Password JDM
I just got my headlight a few hours ago!! A couple quick pics
I just got my headlight a few hours ago!! A couple quick pics
Last edited by Kid-Vtek; 10-21-2014 at 12:44 PM.
#160
Honda-Tech Member
Thread Starter
Join Date: Jan 2012
Location: Calgary, AB, Canada
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Re: Kid-Vtek's EK build "lets try this again"
20141027_213055 by Guglianoh
swapped over my tucked harness, shes getting close..... Waiting on some parts to finish the air box, then exhaust comes next. stay tuned
swapped over my tucked harness, shes getting close..... Waiting on some parts to finish the air box, then exhaust comes next. stay tuned
#162
Honda-Tech Member
Thread Starter
Join Date: Jan 2012
Location: Calgary, AB, Canada
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Re: Kid-Vtek's EK build "lets try this again"
Small update:
One step closer to finishing my air box
2014-11-05 06.33.15
2014-11-05 06.33.31
2014-11-05 06.33.44
2014-11-05 06.33.56
20141108_143813
finished installing my Naca duct and intercooler duct very pleased with how it turned out
20141111_191715
20141111_191807
Installed my vale cover and started routing my breather tank lines
20141111_192208
20141111_192857
One step closer to finishing my air box
2014-11-05 06.33.15
2014-11-05 06.33.31
2014-11-05 06.33.44
2014-11-05 06.33.56
20141108_143813
finished installing my Naca duct and intercooler duct very pleased with how it turned out
20141111_191715
20141111_191807
Installed my vale cover and started routing my breather tank lines
20141111_192208
20141111_192857
#165
Honda-Tech Member
Thread Starter
Join Date: Jan 2012
Location: Calgary, AB, Canada
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Re: Kid-Vtek's EK build "lets try this again"
Thanks guys!
This next update may not be everyones cup of tea lol enjoy?
Started off by trimming the bumper, drag style
began mocking up the diffuser. it looks funny all pressed up against the bumper. ill be hanging it with some brackets
like so
sits flush
love the exposed wheel lol
This next update may not be everyones cup of tea lol enjoy?
Started off by trimming the bumper, drag style
began mocking up the diffuser. it looks funny all pressed up against the bumper. ill be hanging it with some brackets
like so
sits flush
love the exposed wheel lol
Last edited by Kid-Vtek; 11-22-2014 at 11:02 PM.
#166
Honda-Tech Member
Thread Starter
Join Date: Jan 2012
Location: Calgary, AB, Canada
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Re: Kid-Vtek's EK build "lets try this again"
Progress has slowed because of christmas, naturally, how ever i managed to removed and install my roll cage from the previous chasis to the new one.... in one peice!!! it was challenging to say the least but i managed to pull it off. She is off to the original cage maker to weld it back into place and extend it further to the front to make it a full 6 point cage. Once that is complete i will be sending it off to the body shop to have the interior and engine bay painted so final assembly of the engine and interior can begin!
some parts arrived! EK9 Rear bumper support. 2.8lbs vs the USDM 12.65lbs
20141218_121807 by Guglianoh, on Flickr
20141218_121928 by Guglianoh, on Flickr
I also have some JUN cam gears on the way. i honestly had no idea JUN made them but i saw them and had to have them! can not wait for them to show up, a small christmas gift for myself haha
some parts arrived! EK9 Rear bumper support. 2.8lbs vs the USDM 12.65lbs
20141218_121807 by Guglianoh, on Flickr
20141218_121928 by Guglianoh, on Flickr
I also have some JUN cam gears on the way. i honestly had no idea JUN made them but i saw them and had to have them! can not wait for them to show up, a small christmas gift for myself haha
#169
Honda-Tech Member
Re: Kid-Vtek's EK build "lets try this again"
sick build man keep up the good work i really dig how you've taking professional high end merch. and putting your own twist to it. also glad you stayed motivated through the shitty luck I know how that feel from experience. cant wait for the final product.!!!
#171
Honda-Tech Member
Thread Starter
Join Date: Jan 2012
Location: Calgary, AB, Canada
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Re: Kid-Vtek's EK build "lets try this again"
Massive update!!! i know its been ages since my last update but i assure you it was worth the wait! You guys can follow me on Instagram for quicker update @kidvtek.
I installed my CTR rebar. The aluminium sheet you see is actually a rear splitter that i made after cutting out the spare tire tub for allow for my diffuser to sit flat with the bottom of the car.
20150510_160125
i then finished my diffuser mounting brackets which allow for rake adjustment of the diffuser.
20150620_185657 by Guglianoh, on Flickr
20150620_203722 by Guglianoh, on Flickr
20150620_203743 by Guglianoh, on Flickr
20150620_184944 by Guglianoh, on Flickr
Got some Spoon rigid collars
20150821_061413 by Guglianoh, on Flickr
Next was to tackle fitting my wheels!
20150527_194520 by Guglianoh, on Flickr
20150527_194443 by Guglianoh, on Flickr
I installed my CTR rebar. The aluminium sheet you see is actually a rear splitter that i made after cutting out the spare tire tub for allow for my diffuser to sit flat with the bottom of the car.
20150510_160125
i then finished my diffuser mounting brackets which allow for rake adjustment of the diffuser.
20150620_185657 by Guglianoh, on Flickr
20150620_203722 by Guglianoh, on Flickr
20150620_203743 by Guglianoh, on Flickr
20150620_184944 by Guglianoh, on Flickr
Got some Spoon rigid collars
20150821_061413 by Guglianoh, on Flickr
Next was to tackle fitting my wheels!
20150527_194520 by Guglianoh, on Flickr
20150527_194443 by Guglianoh, on Flickr
#172
Honda-Tech Member
Thread Starter
Join Date: Jan 2012
Location: Calgary, AB, Canada
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Re: Kid-Vtek's EK build "lets try this again"
i tried a number of bolt on flares from miatas to AE86, the 86 flare was actually very close but they all moved the center of the wheel arch either forward or backwards and made the wheel look off center when mounted. i purchased a fenrder roller and went to town! i flattened the lip of the inside of the fenders 'paper thin', then progressively pulled the fender using pie cuts on the inside of the fender. i then shaped the inside of the wheel tub to fit the wheel. here are the results.
20150718_220818 by Guglianoh, on Flickr
20150718_220800 by Guglianoh, on Flickr
20150718_202447 by Guglianoh, on Flickr
20150718_220833 by Guglianoh, on Flickr
with the SSR's fitted
20150718_202431 by Guglianoh, on Flickr
20150718_202408 by Guglianoh, on Flickr
20150718_190128 by Guglianoh, on Flickr
20150718_190023 by Guglianoh, on Flickr
20150718_190054 by Guglianoh, on Flickr
They actually fit now!!! the nice part is my suspension is almost fully lowered and my wheels fit inside the tub as they camber in! im also almost at zero camber right now so i still have some room to tweek my suspension settings. We shall see how these tires hold up traction wise, idealy on my track wheel i would like to try and fit a 245 wheel all around.
20150718_220818 by Guglianoh, on Flickr
20150718_220800 by Guglianoh, on Flickr
20150718_202447 by Guglianoh, on Flickr
20150718_220833 by Guglianoh, on Flickr
with the SSR's fitted
20150718_202431 by Guglianoh, on Flickr
20150718_202408 by Guglianoh, on Flickr
20150718_190128 by Guglianoh, on Flickr
20150718_190023 by Guglianoh, on Flickr
20150718_190054 by Guglianoh, on Flickr
They actually fit now!!! the nice part is my suspension is almost fully lowered and my wheels fit inside the tub as they camber in! im also almost at zero camber right now so i still have some room to tweek my suspension settings. We shall see how these tires hold up traction wise, idealy on my track wheel i would like to try and fit a 245 wheel all around.
#173
Honda-Tech Member
Thread Starter
Join Date: Jan 2012
Location: Calgary, AB, Canada
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Re: Kid-Vtek's EK build "lets try this again"
This is where is gets interesting At last she is ready for paint!
SAM_9616 by Guglianoh, on Flickr
SAM_9615 by Guglianoh, on Flickr
After what seems like forever i finally get to see my paint color! they started by painting the interior and engine bay
photo 2-2 by Guglianoh, on Flickr
photo 4-2 by Guglianoh, on Flickr
photo 3-2 by Guglianoh, on Flickr
At a loss for words
SAM_9785 by Guglianoh, on Flickr
SAM_9787 by Guglianoh, on Flickr
SAM_9819 by Guglianoh, on Flickr
IMG_20150821_183610 by Guglianoh, on Flickr
photo 1-2 by Guglianoh, on Flickr
photo 4-3 by Guglianoh, on Flickr
This Tuesday she finally gets back to me looking absolutely stunning! Home sweet home!
20150825_113026 by Guglianoh, on Flickr
20150825_112559 by Guglianoh, on Flick
The color turned out way better than i expected and the body shop did a phenomenal job shaping my rear quarter panels from the aggressive pull, they told my the roof like was slightly distorted from the pull lol im extremely happy with how it turned out!
20150825_113111 by Guglianoh, on Flickr
20150825_113101 by Guglianoh, on Flickr
20150825_112329 by Guglianoh, on Flickr
SAM_9616 by Guglianoh, on Flickr
SAM_9615 by Guglianoh, on Flickr
After what seems like forever i finally get to see my paint color! they started by painting the interior and engine bay
photo 2-2 by Guglianoh, on Flickr
photo 4-2 by Guglianoh, on Flickr
photo 3-2 by Guglianoh, on Flickr
At a loss for words
SAM_9785 by Guglianoh, on Flickr
SAM_9787 by Guglianoh, on Flickr
SAM_9819 by Guglianoh, on Flickr
IMG_20150821_183610 by Guglianoh, on Flickr
photo 1-2 by Guglianoh, on Flickr
photo 4-3 by Guglianoh, on Flickr
This Tuesday she finally gets back to me looking absolutely stunning! Home sweet home!
20150825_113026 by Guglianoh, on Flickr
20150825_112559 by Guglianoh, on Flick
The color turned out way better than i expected and the body shop did a phenomenal job shaping my rear quarter panels from the aggressive pull, they told my the roof like was slightly distorted from the pull lol im extremely happy with how it turned out!
20150825_113111 by Guglianoh, on Flickr
20150825_113101 by Guglianoh, on Flickr
20150825_112329 by Guglianoh, on Flickr
#174
Honda-Tech Member
Thread Starter
Join Date: Jan 2012
Location: Calgary, AB, Canada
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Re: Kid-Vtek's EK build "lets try this again"
Which leads me to tonight! right after work i went and began reassembly! this is how far i got tonight
20150826_193737 by Guglianoh, on Flickr
20150826_193905 by Guglianoh, on Flickr
20150826_203236 by Guglianoh, on Flickr
20150826_204827 by Guglianoh, on Flickr
its hard to describe how good it feels to finally be excited about my car again! even though im exhausted and will not be having much sleep in the weeks to come, this makes it all worth it
download_20150826_223203 by Guglianoh, on Flickr
20150826_193737 by Guglianoh, on Flickr
20150826_193905 by Guglianoh, on Flickr
20150826_203236 by Guglianoh, on Flickr
20150826_204827 by Guglianoh, on Flickr
its hard to describe how good it feels to finally be excited about my car again! even though im exhausted and will not be having much sleep in the weeks to come, this makes it all worth it
download_20150826_223203 by Guglianoh, on Flickr
#175
Re: Kid-Vtek's EK build "lets try this again"
Dude !
I follow this tread for so long now and i have much respect for what u did !
Great great build man !!
Greetings from the Netherlands.
I follow this tread for so long now and i have much respect for what u did !
Great great build man !!
Greetings from the Netherlands.