elfather's K20A EK build up again lol
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2006
Posts: 1,421
Likes: 0
Received 0 Likes
on
0 Posts
elfather's K20A EK build up again lol
well guys here's my project that i have been working on for 15 months now the car its almost complete at this point, just minor stuff are left to do on the car.
my goal is to build the perfect car for me which is a SHOW/STREET/RACE/TRACK CAR. this car its deff NOT a trailer queen just to clear that out.
im planing on building the motor within the next 2 month my goal is nothing crazy looking to get around 260-265 im trying to keep it pump gas.
well without further delay here everything i documented from the moment i began my swap. i hope you enjoy the pics because theres a whole lot of them so be patient wait for them to load lol.
P.S
I HOPE THIS HELPS PEOPLE THAT WILL TAKE ON THIS CHALLENGE IN THE FUTURE.
the shell 96 ek cx
so i realize and decided that i hated the 96 light gray interior and i went ahead and did a whole 2000 dash heater core and blower, interior conversion every single panel i replaced it with the 99-00 dark gray from the center console to the speakers cover well... im still missing the door panels thats the only thing that was damaged on the 2000 ek i got all the panels from.
old light grey
new one
see the difference?
"new" panels
SWAP PARTS
HASPORTS EKK2 MOUNTS
russell prolite fuel hoses
RBC MANIFOLD
ADAPTER
DTR/SSR HEADER FTW!
my goal is to build the perfect car for me which is a SHOW/STREET/RACE/TRACK CAR. this car its deff NOT a trailer queen just to clear that out.
im planing on building the motor within the next 2 month my goal is nothing crazy looking to get around 260-265 im trying to keep it pump gas.
well without further delay here everything i documented from the moment i began my swap. i hope you enjoy the pics because theres a whole lot of them so be patient wait for them to load lol.
P.S
I HOPE THIS HELPS PEOPLE THAT WILL TAKE ON THIS CHALLENGE IN THE FUTURE.
the shell 96 ek cx
so i realize and decided that i hated the 96 light gray interior and i went ahead and did a whole 2000 dash heater core and blower, interior conversion every single panel i replaced it with the 99-00 dark gray from the center console to the speakers cover well... im still missing the door panels thats the only thing that was damaged on the 2000 ek i got all the panels from.
old light grey
new one
see the difference?
"new" panels
SWAP PARTS
HASPORTS EKK2 MOUNTS
russell prolite fuel hoses
RBC MANIFOLD
ADAPTER
DTR/SSR HEADER FTW!
#2
Honda-Tech Member
Thread Starter
Join Date: Apr 2006
Posts: 1,421
Likes: 0
Received 0 Likes
on
0 Posts
Re: elfather's K20A EK build up again lol (elfather)
KTELLER BOLT ON 3" EXHAUST
COOLANT OVER FLOAT RESERVOIR
CHASSIS BOLTS
[IMG][/IMG]
1/8 NPT FITTING FOR THE COOLANT TEMP SENSOR INTO THE COOLANT BYPASS
STAGGERED CPR'S DUNLOP EDITION
NEW TE'S
CTR REAR LIP:bang:
EG SUBFRAME AND RACK
ALL NEW RACK GASKETS
MY LIL SPOON COLLECTION
#3
Honda-Tech Member
Thread Starter
Join Date: Apr 2006
Posts: 1,421
Likes: 0
Received 0 Likes
on
0 Posts
Re: elfather's K20A EK build up again lol (elfather)
BRAND NEW PAIR OF CTR HEAD LIGHTS FROM HMO
03 K20A DC5 ITR MOTOR SAME DAY I GOTIT SUPER CLEANNN HMO FTW!
RBC INSTALLED
GETTING READY TO REPAINT THE ENGINE BAY
A/C BLOCK OFF GROMMET
FUSE BOX AND THE AND OLD BODY HARNESS PLUGS
SHAVED AND CHROMED OUT RBC:bang:
SICKEST CAI I'VE SEEN
MY CUSTOM BRAKE/CLUTCH LINES:D
#4
Honda-Tech Member
Thread Starter
Join Date: Apr 2006
Posts: 1,421
Likes: 0
Received 0 Likes
on
0 Posts
Re: elfather's K20A EK build up again lol (elfather)
VALVE COVER BREATHER
NEW BATTERY ODYSSEY FTW!
BF DRAGS
MY SEATS I HAD TO WAIT 3 MONTHS FOR THESE BAD MFS TO ARRIVED FROM JAPAN. BUT THE WAIT WAS DAMN WORTH IT.
nice padding :up::up:
i also have a set of these beauties on the way hopefully they'll get this month.
bride ftmfw:up::up::up:
AEBS radiator hose clamps
ARS BRACE
THIS IS THE DAY ME AND MY MY GAY HOMEBOY (phatlipciv) DROPPED THE MOTOR IN:thumbup:
[IMG][/IMG]
Modified by elfather at 12:05 PM 7/5/2008
#5
Honda-Tech Member
Thread Starter
Join Date: Apr 2006
Posts: 1,421
Likes: 0
Received 0 Likes
on
0 Posts
Re: elfather's K20A EK build up again lol (elfather)
BATTERY INSTALLED
finally got done wire looping my whole harness
INSTALLING SOME STUFF OVER THE WEEKEND
FINAL TOUCHES TO THE WIRE TUCK
and if anybody cares to know the new DTR/SSR headers design completely clears the karcepts shifter box
#6
Honda-Tech Member
Thread Starter
Join Date: Apr 2006
Posts: 1,421
Likes: 0
Received 0 Likes
on
0 Posts
Re: elfather's K20A EK build up again lol (elfather)
SO i was having this dilemma, about where i was going to route my engine harness into the car. as most of you guys already know im all about engine bay cleaness. well i finally came to the following conclusion enjoy! lol...
so if you want a nearly out of sight engine harness here's what you have to do....
THIS IS THE LATEST PIC OF THE CAR FULL PICS WILL COME SOON WHEN THE TIME ITS RIGHT :D I HOPE YOU ENJOY THE PICSAND ILL KEEP YOU GUYS POSTED.
Spoon Dry carbon diffuser
new calipers with 2 piece stop tech aero rotors
racepak
seeker v2 wing
so if you want a nearly out of sight engine harness here's what you have to do....
THIS IS THE LATEST PIC OF THE CAR FULL PICS WILL COME SOON WHEN THE TIME ITS RIGHT :D I HOPE YOU ENJOY THE PICSAND ILL KEEP YOU GUYS POSTED.
Spoon Dry carbon diffuser
new calipers with 2 piece stop tech aero rotors
racepak
seeker v2 wing
Last edited by elfather; 08-12-2010 at 09:07 PM.
Trending Topics
#16
Honda-Tech Member
Join Date: Mar 2005
Location: USA
Posts: 6,373
Likes: 0
Received 0 Likes
on
0 Posts
Re: (rhd94teg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rhd94teg »</TD></TR><TR><TD CLASS="quote">such a great build </TD></TR></TABLE>
#23
Honda-Tech Member
Thread Starter
Join Date: Apr 2006
Posts: 1,421
Likes: 0
Received 0 Likes
on
0 Posts
Re: elfather's K20A EK build up again lol (eddie5141981)
thanks for the nice comments guys
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eddie5141981 »</TD></TR><TR><TD CLASS="quote">im loving your built good work
just one question how are going to swap out your filter elemet????
</TD></TR></TABLE>
thanks man. i know why you say that, from the picture it looks like the subframe its on the way lol, but actually there's like a 3" gap between the filter and the subframe, so all i have to do its unscrew the filter from the fire wall, take it out and change the filter
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eddie5141981 »</TD></TR><TR><TD CLASS="quote">im loving your built good work
just one question how are going to swap out your filter elemet????
</TD></TR></TABLE>
thanks man. i know why you say that, from the picture it looks like the subframe its on the way lol, but actually there's like a 3" gap between the filter and the subframe, so all i have to do its unscrew the filter from the fire wall, take it out and change the filter