93_EG6-ST(Street-Turbo)Recaro/Tein/Takata/BYS/Vision/k20z1 Turbo 500+hp
#1
Honda-Tech Member
Thread Starter
Join Date: May 2005
Posts: 1,567
Likes: 0
Received 0 Likes
on
0 Posts
93_EG6-ST(Street-Turbo)Recaro/Tein/Takata/BYS/Vision/k20z1 Turbo 500+hp
Engine:
-K20z1- Type S
-Darton Sleeves-
-9:1 Je Piston w/ Crowler Rods
-Ferrera Valves/ Retianers
-Golden Eagle head Studs
-Has Sport engine mounts
-Hondata K-pro Ecu
-Hondata Intake Manifold Gasket
-Kong Intake manifold
-Kong Top Mount Turbo Manifold
-Kong I/c Pipping
-Kong Down pipe
-Kong Blow down Tube
-Kong Stainless Stee Upperl radiator hoses- upper/lower
-Kong IAC relocator adapter
-Kong Triangle Catch Can
-Kong Battery Trey
-Kong Engine Harness
-Precision Turob Sc61 Billet wheel
-Precision 1000 cc injectors
-Precision 700 hp i/c
-Tial 44mm wastgate
-Tial BOV
-255 Walbro Fuel pump
-New OEM Timing Belt
-New OEM Water pump
-New OEM chain guides
-New Oem Chain tensioner
-Oil Pan, Brand new threads welded on oil return line for turbo
-C/R radiator with fan for RSX
-Thermal Exhaust stainless steel 3” piping
-Ceramic coated turbo housing/down pipe/turbo manifold/Blow down tube
Drivetrain:
-Rsx base model 5 speed trans
-All new Syncros
-Aluminum Flywheel Compettion clutch
-Stage 4 Competition clutch
-Gator axles- rated at 500 whp
-Quaife LSD :dribble:
-Karcept shifter Bracket
-Rsx shifter cables/shifter box
Suspension:
-Tein Flex coilovers w/ EDFC
-Kong traction bar
-Function 7 camber kits
Brakes
-12.2 Wildwood Calipers with s/s brake lines :dribble:
-Rear disc conversion from 00 si
-rear ep3 4x100 10.2 rotors with rsx calipers
-hawk street pads
-4040 GSR proportion valve
-New Rear Rotors
Wheels/Tires:
-16x7 Volk Racing Wheels Bronze :dribble:
-Falken Azenis 215/45R16
-Burnt Chrome Lug nuts
Body:
-Carbon fiber Wing (prvious owner states it was a spoon!)
-Vis carbon Trunk :dribble:
-Backyard Specail lip :dribble:
-OEM Mud Guards
-Oem front bumper
-Vision carbon mirrors :dribble:
-Recaro Speed Seats :dribble:
-Buddy Club Super Low seat rails
-Takata harness :dribble:
-Momo Monte Carolo 320mm wheel
-NRG Gold Hub/quick release
-Oem Honda Jdm Arm rest (Wrapped in red tweed)
-Oem Honda Jdm center counsol
-Driverside/Passenger Side Door panels Wrapped in red tweed(similar to type R set up)
-Tein Hood Damper
-OEM TYPE R DC5 Valve Cover
-Benen tripod strut bar- hope it fits with my top mount kong manifold!
-Spoon rear lower tie bar
-Itr shift boot- red stitching
-OEM Stanley Corners- New
-JDM EG6 Headlights
-ARC Titan shift ****
When i first got her............
my first k24 swap... where i didnt know the valve was bent!
Found out motor was no good. here comes turbo time mock up!
my block is done and ready for assembly! yaya! darton sleeve stock bore!
some jdm goodies!
-K20z1- Type S
-Darton Sleeves-
-9:1 Je Piston w/ Crowler Rods
-Ferrera Valves/ Retianers
-Golden Eagle head Studs
-Has Sport engine mounts
-Hondata K-pro Ecu
-Hondata Intake Manifold Gasket
-Kong Intake manifold
-Kong Top Mount Turbo Manifold
-Kong I/c Pipping
-Kong Down pipe
-Kong Blow down Tube
-Kong Stainless Stee Upperl radiator hoses- upper/lower
-Kong IAC relocator adapter
-Kong Triangle Catch Can
-Kong Battery Trey
-Kong Engine Harness
-Precision Turob Sc61 Billet wheel
-Precision 1000 cc injectors
-Precision 700 hp i/c
-Tial 44mm wastgate
-Tial BOV
-255 Walbro Fuel pump
-New OEM Timing Belt
-New OEM Water pump
-New OEM chain guides
-New Oem Chain tensioner
-Oil Pan, Brand new threads welded on oil return line for turbo
-C/R radiator with fan for RSX
-Thermal Exhaust stainless steel 3” piping
-Ceramic coated turbo housing/down pipe/turbo manifold/Blow down tube
Drivetrain:
-Rsx base model 5 speed trans
-All new Syncros
-Aluminum Flywheel Compettion clutch
-Stage 4 Competition clutch
-Gator axles- rated at 500 whp
-Quaife LSD :dribble:
-Karcept shifter Bracket
-Rsx shifter cables/shifter box
Suspension:
-Tein Flex coilovers w/ EDFC
-Kong traction bar
-Function 7 camber kits
Brakes
-12.2 Wildwood Calipers with s/s brake lines :dribble:
-Rear disc conversion from 00 si
-rear ep3 4x100 10.2 rotors with rsx calipers
-hawk street pads
-4040 GSR proportion valve
-New Rear Rotors
Wheels/Tires:
-16x7 Volk Racing Wheels Bronze :dribble:
-Falken Azenis 215/45R16
-Burnt Chrome Lug nuts
Body:
-Carbon fiber Wing (prvious owner states it was a spoon!)
-Vis carbon Trunk :dribble:
-Backyard Specail lip :dribble:
-OEM Mud Guards
-Oem front bumper
-Vision carbon mirrors :dribble:
-Recaro Speed Seats :dribble:
-Buddy Club Super Low seat rails
-Takata harness :dribble:
-Momo Monte Carolo 320mm wheel
-NRG Gold Hub/quick release
-Oem Honda Jdm Arm rest (Wrapped in red tweed)
-Oem Honda Jdm center counsol
-Driverside/Passenger Side Door panels Wrapped in red tweed(similar to type R set up)
-Tein Hood Damper
-OEM TYPE R DC5 Valve Cover
-Benen tripod strut bar- hope it fits with my top mount kong manifold!
-Spoon rear lower tie bar
-Itr shift boot- red stitching
-OEM Stanley Corners- New
-JDM EG6 Headlights
-ARC Titan shift ****
When i first got her............
my first k24 swap... where i didnt know the valve was bent!
Found out motor was no good. here comes turbo time mock up!
my block is done and ready for assembly! yaya! darton sleeve stock bore!
some jdm goodies!
Last edited by vinmotors; 07-02-2009 at 10:37 AM.
#2
Honda-Tech Member
Thread Starter
Join Date: May 2005
Posts: 1,567
Likes: 0
Received 0 Likes
on
0 Posts
Re: 93_EG6-ST(Street-Turbo)Recaro/Tein/Takata/BYS/Vision/k20z1 Turbo 500+hp
Time to mount my new motor set up!
Notice the custom intake manifold my Pops is making!
and more pics to come.
Notice the custom intake manifold my Pops is making!
and more pics to come.
Last edited by vinmotors; 04-09-2009 at 09:35 AM.
#3
Honda-Tech Member
Thread Starter
Join Date: May 2005
Posts: 1,567
Likes: 0
Received 0 Likes
on
0 Posts
Re: 93_EG6-ST(Street-Turbo)Recaro/Tein/Takata/BYS/Vision/k20z1 Turbo 500+hp
peep out the intake manifold my pops did, snapped on the fab work!
Nel-G gettin down on fab/welds! Works for Gm as a Welder/Fabricator
My new problem, upgrade my rotors to Wilwood 4-piston 12.2 Rotors. Now i have to get ride of my Kosei Wheels! sucks!
A lot more to come, so stay tuned!
Nel-G gettin down on fab/welds! Works for Gm as a Welder/Fabricator
My new problem, upgrade my rotors to Wilwood 4-piston 12.2 Rotors. Now i have to get ride of my Kosei Wheels! sucks!
A lot more to come, so stay tuned!
Last edited by vinmotors; 04-09-2009 at 09:44 AM.
#5
Honda-Tech Member
iTrader: (7)
Join Date: Dec 2005
Location: Anchorage, AK
Posts: 3,032
Likes: 0
Received 0 Likes
on
0 Posts
Re: 93_EG6-ST(Street-Turbo)Recaro/Tein/Takata/BYS/Vision/k20z1 Turbo 500+hp
Wowzers.
sidenote. Those 15" decals kill me. I always chuckle when i see them on our hondas. Eat your heart out dub magazine.
sidenote. Those 15" decals kill me. I always chuckle when i see them on our hondas. Eat your heart out dub magazine.
#7
Honda-Tech Member
Thread Starter
Join Date: May 2005
Posts: 1,567
Likes: 0
Received 0 Likes
on
0 Posts
Re: 93_EG6-ST(Street-Turbo)Recaro/Tein/Takata/BYS/Vision/k20z1 Turbo 500+hp
490-520 at 20psi! I should reach it cuz my bro has same set up but in his EK.
Here's his ride........................
Here's his ride........................
Trending Topics
#9
Honda-Tech Member
Thread Starter
Join Date: May 2005
Posts: 1,567
Likes: 0
Received 0 Likes
on
0 Posts
Re: 93_EG6-ST(Street-Turbo)Recaro/Tein/Takata/BYS/Vision/k20z1 Turbo 500+hp
yeah I plan on getting some good pass in 1/4 mile but really enjoy street driving on the highway. Just build a really nice overall car: Street/Track/Show with some good sounds as well.
#10
#11
Honda-Tech Member
Thread Starter
Join Date: May 2005
Posts: 1,567
Likes: 0
Received 0 Likes
on
0 Posts
Re: 93_EG6-ST(Street-Turbo)Recaro/Tein/Takata/BYS/Vision/k20z1 Turbo 500+hp
#19
Honda-Tech Member
Thread Starter
Join Date: May 2005
Posts: 1,567
Likes: 0
Received 0 Likes
on
0 Posts
Re: 93_EG6-ST(Street-Turbo)Recaro/Tein/Takata/BYS/Vision/k20z1 Turbo 500+hp
I just bought my volks today! My wilwood calipers cleared perfect!
GOt the welds done on the i/c by nel-G
We cleaned up the harness today. will show you better pics tomorrow. It was a long productive day!
GOt the welds done on the i/c by nel-G
We cleaned up the harness today. will show you better pics tomorrow. It was a long productive day!
#24
Honda-Tech Member
Thread Starter
Join Date: May 2005
Posts: 1,567
Likes: 0
Received 0 Likes
on
0 Posts
Re: 93_EG6-ST(Street-Turbo)Recaro/Tein/Takata/BYS/Vision/k20z1 Turbo 500+hp
OK all the fabrication is complete. Parts are ready for ceramic coating/ polishing and chroming. We finished the 3/8 chromoly traction bar, jus need to mock the radiator. But she is coming along pretty. Now some down time till parts are completed from final finishing. Will button up interior trims, more pics to come!!
ready for ceramic coating/polishing and chroming!
3/8 chromoly taction bar!
ready for ceramic coating/polishing and chroming!
3/8 chromoly taction bar!
#25
Honda-Tech Member
Join Date: Feb 2008
Location: Portland, Oregon, USA
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Re: 93_EG6-ST(Street-Turbo)Recaro/Tein/Takata/BYS/Vision/k20z1 Turbo 500+hp
wow!
your break setup and wheel choice is beautiful!
keep up the good work.
your break setup and wheel choice is beautiful!
keep up the good work.