91 Civic Sedan> in the making?!
#1
Honda-Tech Member
Thread Starter
91 Civic Sedan> in the making?!
TABLE OF CONTENT IS DOWN DUE TO POST COUNT BEING BACK TO 25. MESSED MY **** UP LOL!!
Updated Pix 5/09/09
March 01 2010
October 10th 2010
THEN this thread took a path to an Endless Road
Thread Started 1-27-2007
i just bought a 91 honda civic sedan. its salvage dude to a lil accident at the front passenger side, lil frame bent but everything still sits right.
car came with:
all four blown shocks
no corner lights
88-91 Si seats (no tear)
no rear trunk carpet or quarter panel carpet.
14' blackouts with falkens azenis with barely any treads left.
3of4 door locks are broken
no exhaust system
several dinks and Dents here and there
the thing about the car is that it came with a stock beat up b20b with a crack b16 tranny. and an Aem intake with 3 nitrous ports (holes) on it. which it needed state ref for. apparently i got it cleared and it didnt need one.
car cost me 1500 dollars cash.
heres some pix
how i first got it.
the b20 engine, the aem intake with the nitrous holes, those aftermarket headers are 2 piece. and the second piece (downpipe) was an h22 and it wasnt even connected so its was like driving with open headers.
ill get some more pix up of whats coming next.
Updated Pix 5/09/09
March 01 2010
October 10th 2010
THEN this thread took a path to an Endless Road
Thread Started 1-27-2007
i just bought a 91 honda civic sedan. its salvage dude to a lil accident at the front passenger side, lil frame bent but everything still sits right.
car came with:
all four blown shocks
no corner lights
88-91 Si seats (no tear)
no rear trunk carpet or quarter panel carpet.
14' blackouts with falkens azenis with barely any treads left.
3of4 door locks are broken
no exhaust system
several dinks and Dents here and there
the thing about the car is that it came with a stock beat up b20b with a crack b16 tranny. and an Aem intake with 3 nitrous ports (holes) on it. which it needed state ref for. apparently i got it cleared and it didnt need one.
car cost me 1500 dollars cash.
heres some pix
how i first got it.
the b20 engine, the aem intake with the nitrous holes, those aftermarket headers are 2 piece. and the second piece (downpipe) was an h22 and it wasnt even connected so its was like driving with open headers.
ill get some more pix up of whats coming next.
Last edited by My_EFsedan; 10-09-2010 at 12:52 AM.
#5
Honda-Tech Member
Thread Starter
Re: 91 Civic Sedan> in the making?! (e jay one)
the car, i just got it smogged 3 days ago for o7 tag, so im good for 2 years.
the car didnt go state ref, i was cleared so that i didnt have to do.
so the car i got it last year on dec 8th
got some pix of wat is done to car. ill post lil my lil
got some hub caps to make the car look stock/sleeper. SJ cali, cars are getting cracked down hard here.
got some rear mudflaps off a ef civic hatchback
got a new exhaust, 2.5 inch pipe for my b20 to flow well. new muffler new regsinator and cat.
also got some tokico white illuminas gas shocks (4) with some coilover (rides smooth) picked these up from a fresh DA at the pick n pulls for 150. non-blown
droppped about 2 finger between the tires and fender well.
ill get some more pix today
the car didnt go state ref, i was cleared so that i didnt have to do.
so the car i got it last year on dec 8th
got some pix of wat is done to car. ill post lil my lil
got some hub caps to make the car look stock/sleeper. SJ cali, cars are getting cracked down hard here.
got some rear mudflaps off a ef civic hatchback
got a new exhaust, 2.5 inch pipe for my b20 to flow well. new muffler new regsinator and cat.
also got some tokico white illuminas gas shocks (4) with some coilover (rides smooth) picked these up from a fresh DA at the pick n pulls for 150. non-blown
droppped about 2 finger between the tires and fender well.
ill get some more pix today
Trending Topics
#8
Honda-Tech Member
Thread Starter
Re: 91 Civic Sedan> in the making?! (143MYVTECEF)
interior:
88-91 Si seats
94-01 integra center console. it aligns but besides the gap in the front
stained rear seats
NRG quick release, i had to order a 5 hole pattern for my GT Grant steering wheel cause i cant afford the Sparco or momo.
http://www.intakeone.com/Inter....html
for people who has a 5 hole pattern like mines and not a 6 hole pattern like momo/sparco
got some bumper corners and i still need the fender corner lights
now before i even put on those tokico shocks i found out that the car came with a Rigs suspension (ghetto) dirver side had an integra kunckle assembly and passenger side with a civic knuckle assembly
i was putting on my tranny from the crx (bro gave me for xmas) along with his hasport motor mounts cause mines was tearing, it now has the crome mounts that hasport had for 6 bills back in the days, i decide to take out his engine as well because hes not in the scene anymore.
i have the J1 tranny from japans 95 delsol, its optional cause it also comes in hydro
heres the engine bay currently, i took out the blue aem intake with the nitrous holes and out on a carb legal red aem intake, replaced the radiator with brackets (old pix of engine bay had zipties) got LS headers with heatshield, for some batteriy bracket and the lil red rubber that goes on the positive wire.
more pix in a bit
Modified by My_EFsedan at 8:40 PM 1/29/2007
88-91 Si seats
94-01 integra center console. it aligns but besides the gap in the front
stained rear seats
NRG quick release, i had to order a 5 hole pattern for my GT Grant steering wheel cause i cant afford the Sparco or momo.
http://www.intakeone.com/Inter....html
for people who has a 5 hole pattern like mines and not a 6 hole pattern like momo/sparco
got some bumper corners and i still need the fender corner lights
now before i even put on those tokico shocks i found out that the car came with a Rigs suspension (ghetto) dirver side had an integra kunckle assembly and passenger side with a civic knuckle assembly
i was putting on my tranny from the crx (bro gave me for xmas) along with his hasport motor mounts cause mines was tearing, it now has the crome mounts that hasport had for 6 bills back in the days, i decide to take out his engine as well because hes not in the scene anymore.
i have the J1 tranny from japans 95 delsol, its optional cause it also comes in hydro
heres the engine bay currently, i took out the blue aem intake with the nitrous holes and out on a carb legal red aem intake, replaced the radiator with brackets (old pix of engine bay had zipties) got LS headers with heatshield, for some batteriy bracket and the lil red rubber that goes on the positive wire.
more pix in a bit
Modified by My_EFsedan at 8:40 PM 1/29/2007
#13
Honda-Tech Member
Thread Starter
Re: (~sp33~)
got sidemarkers from password jdm for 37 with lightbulb wires etc, in 5 days i recieved it.
relocated my license plate with an eg bracket, its bolted on no screwed onto the molding like some ppl do.
Random pix
thing is my house has the whole ef squad.
mines and the wago (bros)
The Real Family EF squad (hatch crx sedan & wagon)
relocated my license plate with an eg bracket, its bolted on no screwed onto the molding like some ppl do.
Random pix
thing is my house has the whole ef squad.
mines and the wago (bros)
The Real Family EF squad (hatch crx sedan & wagon)
#16
Honda-Tech Member
Thread Starter
Re: (~sp33~)
my indicator is high? lol, whats that?, well my sisters car i dont have pix of it, its an automatic everything stock, she got the car painted super sonic blue in and out
#17
Honda-Tech Member
Join Date: Sep 2005
Location: CA
Posts: 2,758
Likes: 0
Received 0 Likes
on
0 Posts
Re: (My_EFsedan)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by My_EFsedan »</TD></TR><TR><TD CLASS="quote">my indicator is high? lol, whats that?</TD></TR></TABLE>
Your side marker.
I like your car dude, i wish i had a sedan for a DD...maybe one day
Your side marker.
I like your car dude, i wish i had a sedan for a DD...maybe one day
#18
Honda-Tech Member
Thread Starter
Re: (Cheeech)
o0h ok, well i like it that way, cause to me, it looked kind of weird close to my moldings
http://www.jdmuniverse.com/for...arker
i followed through this for ef8 and ef9 sidemarkers, i cut it the way it is on the diagram but a lil more away and up more..like this ( note that those inches are the length of the outside of the sidemarker, not the cutout)
http://www.jdmuniverse.com/for...arker
i followed through this for ef8 and ef9 sidemarkers, i cut it the way it is on the diagram but a lil more away and up more..like this ( note that those inches are the length of the outside of the sidemarker, not the cutout)
#20
Honda-Tech Member
Thread Starter
Re: (mr_hahn73)
ill keep yall updated, im still waiting on getting my stickers on down my window( ef sedan squad, i <3 jdm/honda etc), then im looking to get the 1st gen integra front lip on and do the 50$ paintjob as a thread stated on HT. an hoping i can get enough mula for rota track Rs in '16 white
#22
Honda-Tech Member
Thread Starter
#24
Join Date: Nov 2005
Location: travis afb/sacramento, california, usa
Posts: 538
Likes: 0
Received 0 Likes
on
0 Posts
Re: (allsho)
Nice build... gota love the EF sedans.. i just picked one up in december and LOVE it.. im building a B20 v-tec for it once i finish my crx build (boosted dohc zc that is semi built) did ur bro ever sell his crx shell? i have seen it on CL a lot