Throttle Body Opinions; What Brand Are You Using?
#26
Honda-Tech Member
Thread Starter
Re: Throttle Body Opinions; What Brand Are You Using?
Comparison/demonstration (so I could get my refund without paying return shipping) of Ebay garbage MAP sensor... Ebay 4 Bar MAP Sensor Defective | YBLEGAL.net
#27
Moderator
iTrader: (14)
Re: Throttle Body Opinions; What Brand Are You Using?
Get a good traditional GM 3bar MAP sensor with pigtail. Mount it to the wall, recalibrate sensor in management.. Go on with life..
So what if it's not mounted to the throttle body like OEM.. that one from eBay looks like *** anyway.. C'mon.. It's eBay.. You're going to spend $5 to ship it back to get the rest of your refund..live with it already. At least you may get a refund...
And when converting to bar, the true nature is one bar has to be counted for atmosphere..
#28
Honda-Tech Member
Thread Starter
Re: Throttle Body Opinions; What Brand Are You Using?
Man..y'all make this unnecessarily complicated.
Get a good traditional GM 3bar MAP sensor with pigtail. Mount it to the wall, recalibrate sensor in management.. Go on with life..
So what if it's not mounted to the throttle body like OEM.. that one from eBay looks like *** anyway.. C'mon.. It's eBay.. You're going to spend $5 to ship it back to get the rest of your refund..live with it already. At least you may get a refund...
And when converting to bar, the true nature is one bar has to be counted for atmosphere..
Get a good traditional GM 3bar MAP sensor with pigtail. Mount it to the wall, recalibrate sensor in management.. Go on with life..
So what if it's not mounted to the throttle body like OEM.. that one from eBay looks like *** anyway.. C'mon.. It's eBay.. You're going to spend $5 to ship it back to get the rest of your refund..live with it already. At least you may get a refund...
And when converting to bar, the true nature is one bar has to be counted for atmosphere..
Going to new TB and to OEM map sensor threw my tune off, I don't know how else to say it. I did change the scaler, I'm not THAT dumb, thanks. Took 30mins of street tuning, all is well.
Dropped overall multiplier from 22 to 10, added some 500-1000mbar fuel, removed some fuel from 0-5psi.
I have an Omni Power 4 bar coming. No sweat buddy. However, reaffirms why I never buy ebay parts. You get what you pay for...I'm an idiot for trying it, yes.
Naw, I'm good on wasting more money. Spent 5 minutes shooting vid and posting on phone.
I'm not broke, no need to stress an OEM sensor, just wanna drive my car while Chi has good weather, money well spent once the Omni shows up!
However, 3 bar Omni could have made more sense with higher resolution than 4 bar. I will critique that...
#30
Moderator
iTrader: (14)
Re: Throttle Body Opinions; What Brand Are You Using?
I already was running a firewall mounted GM 2.5 bar. To continue using it, I would need an adapter plate.
Going to new TB and to OEM map sensor threw my tune off, I don't know how else to say it. I did change the scaler, I'm not THAT dumb, thanks. Took 30mins of street tuning, all is well.
Dropped overall multiplier from 22 to 10, added some 500-1000mbar fuel, removed some fuel from 0-5psi.
I have an Omni Power 4 bar coming. No sweat buddy. However, reaffirms why I never buy ebay parts. You get what you pay for...I'm an idiot for trying it, yes.
Naw, I'm good on wasting more money. Spent 5 minutes shooting vid and posting on phone.
I'm not broke, no need to stress an OEM sensor, just wanna drive my car while Chi has good weather, money well spent once the Omni shows up!
However, 3 bar Omni could have made more sense with higher resolution than 4 bar. I will critique that...
Going to new TB and to OEM map sensor threw my tune off, I don't know how else to say it. I did change the scaler, I'm not THAT dumb, thanks. Took 30mins of street tuning, all is well.
Dropped overall multiplier from 22 to 10, added some 500-1000mbar fuel, removed some fuel from 0-5psi.
I have an Omni Power 4 bar coming. No sweat buddy. However, reaffirms why I never buy ebay parts. You get what you pay for...I'm an idiot for trying it, yes.
Naw, I'm good on wasting more money. Spent 5 minutes shooting vid and posting on phone.
I'm not broke, no need to stress an OEM sensor, just wanna drive my car while Chi has good weather, money well spent once the Omni shows up!
However, 3 bar Omni could have made more sense with higher resolution than 4 bar. I will critique that...
I'm glad you found your solution to your situation..you just took a few extra steps to achieve it..
#31
Re: Throttle Body Opinions; What Brand Are You Using?
Got a 70mm BDL throttle body on a B18 ITR intake manifold ported to match. Sometimes on WOT, you let off the throttle and when you hit it again, it sticks before it opens. Adjusted the idle before so the throttle didnt close 100% (throttle plate was gouging into the actual casting in the bore). This is a semi common occurance, my 2 cents for BDL.
#32
Honda-Tech Member
Join Date: Oct 2001
Location: Vernon, BC, Canada
Posts: 525
Likes: 0
Received 0 Likes
on
0 Posts
Re: Throttle Body Opinions; What Brand Are You Using?
Surprised no one has mentioned Professional Products, I have been using their throttle bodies for years and they are literally OEM quality and NEVER had any issues. Good pricing to boot.
Thread
Thread Starter
Forum
Replies
Last Post
B18cHatch06
All Motor / Naturally Aspirated
3
03-29-2006 02:53 PM