residue in B18C cylinders, deck scratch, problem? (pics)
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2004
Location: Wiscago, usa
Posts: 469
Likes: 0
Received 0 Likes
on
0 Posts
residue in B18C cylinders, deck scratch, problem? (pics)
I just got a B18C shortblock with 74k on it. I've never done any internal engine work and am not sure if this is bad.
I noticed this residue on 2 of the cylinders. You can feel it with a fingernail:
There are also some scratches on the deck, like a screwdriver was used to pull off the old headgasket:
Problems or no?
The shortblock is all assembled, so I'd hate to have to have a machine shop disassemble everything to rehone and deck it. But I really don't want to use it as-is and have to tear it apart again later, either. thanks!
I noticed this residue on 2 of the cylinders. You can feel it with a fingernail:
There are also some scratches on the deck, like a screwdriver was used to pull off the old headgasket:
Problems or no?
The shortblock is all assembled, so I'd hate to have to have a machine shop disassemble everything to rehone and deck it. But I really don't want to use it as-is and have to tear it apart again later, either. thanks!
Thread
Thread Starter
Forum
Replies
Last Post
highflyinhonda
All Motor / Naturally Aspirated
1
02-02-2008 04:28 AM