question about CBR 954 DIY ITBs tps
#1
Honda-Tech Member
Thread Starter
iTrader: (3)
Join Date: Feb 2002
Location: Carlisle, PA, usa
Posts: 1,534
Likes: 0
Received 0 Likes
on
0 Posts
question about CBR 954 DIY ITBs tps
just install my honda cbr 954 itbs last night and it idled very rich. i used the check sensor function on the vafc and it showed that tps was reading 4.5v at close throttle and .45v at wot. then i remembered reading that the cbr tps votage was backward. so i tried to put the tps from my old d15 and it fit but the tps turn the opposite way. the question is what wire do i need to switch on the cbr tps to make the votage read correctly.
thanks,
thanks,
#2
Honda-Tech Member
Thread Starter
iTrader: (3)
Join Date: Feb 2002
Location: Carlisle, PA, usa
Posts: 1,534
Likes: 0
Received 0 Likes
on
0 Posts
Re: question about CBR 954 DIY ITBs tps (rice4life)
did some searching and from what i found, i need to swap the two outside wires. please correct me if i'm wrong.
Thread
Thread Starter
Forum
Replies
Last Post
g2tegsown
Honda CRX / EF Civic (1988 - 1991)
7
08-02-2007 04:27 PM
emotionisdead
All Motor / Naturally Aspirated
7
09-27-2004 03:08 PM