power of main bearings SPOON
#1
Blockblade SPOON
what you say about this improvement SPOON, then that picture on the left?
I'm sorry for the correct spelling of the text as the translation is by GOOGLE ...
Last edited by Max[RUS]; 12-28-2011 at 09:11 AM.
#5
Re: power of main bearings SPOON
Interest is justified if this device they hope? ... Why he did not go into society? And if it increases significantly the strength of the block?
#7
Honda-Tech Member
Join Date: Oct 2010
Location: Hellas
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
Re: power of main bearings SPOON
it's pointless on an engine that only mods are intake header & exhaust to rev 11.000rpms
you need a lot modifications to rev past 9500rpms and average oversea spoon customer is satisfied with their reservoir socks and carbon elbow intake bling bling parts they sell ...
so been such a special part they could sell it as spoon let me guess hmm 10.000 $ ?
you need a lot modifications to rev past 9500rpms and average oversea spoon customer is satisfied with their reservoir socks and carbon elbow intake bling bling parts they sell ...
so been such a special part they could sell it as spoon let me guess hmm 10.000 $ ?
Trending Topics
#8
#9
Re: power of main bearings SPOON
They determine the price and not to us, even the $ 10,000 it would cost, who needs that would have bought ... but I am interested in the technical aspect , if install such a tuning that it will give me?
#11
#12
Honda-Tech Member
Re: power of main bearings SPOON
Its called a Blockblade if my memory serves me correctly and is only available when you purchase the whole engine from Spoon Sports.
https://honda-tech.com/forums/all-motor-naturally-aspirated-44/spoon-block-blade-function-7-5-cap-block-girdle-2487161/ someone else asked a while ago
https://honda-tech.com/forums/all-motor-naturally-aspirated-44/spoon-block-blade-function-7-5-cap-block-girdle-2487161/ someone else asked a while ago
#15
Honda-Tech Member
Re: power of main bearings SPOON
theres a video on youtube with that brace installed in a b16b. they make a big deal about it making it seem like that was the only reason they could rev higher, but personally I think it's overrated.
#16
Honda-Tech Member
Join Date: Sep 2011
Location: South New Jersey
Posts: 392
Likes: 0
Received 0 Likes
on
0 Posts
Re: power of main bearings SPOON
Well it keeps the bearings sturdy because it's a full cap not the three cap bull. My f20b had a full sturdy cap and that thing will rev to 9k like nothing it does help did that constantly for three years and it held. Also the rods/stroke ratio has less side wall load the piston/block it barely moves up and down (3.0) inches for b16b which takes those revs.
#17
Re: power of main bearings SPOON
Spec list the block will be based on increasing Rod / stroke ratio to 1.85, Stroke 81mm., Bore 85 mm., Redline 11k achieved all this bude increase in height of the block. Therefore, to achieve the 11k I want to personally make and install custom Blockblade.
http://www.youtube.com/watch?v=M9VFEeA6z1U
video seen but due to no knowledge of language can only understand gestures
And anyone else engaged the calculation of its impact on block and production?
http://www.youtube.com/watch?v=M9VFEeA6z1U
video seen but due to no knowledge of language can only understand gestures
And anyone else engaged the calculation of its impact on block and production?
#19
Honda-Tech Member
Re: power of main bearings SPOON
Screw spoon, i know a company called "fork" that offers a even better block brace.... You can also use it to eat rice with if you can't use chop sticks.
Last edited by rich7777; 12-28-2011 at 09:39 AM.
#21
#22
Resident Gearhead
iTrader: (1)
Re: power of main bearings SPOON
He's joking.
Forget the Spoon blade, look at this about half way down the page:
http://www.erlperformance.com/produc...formance-parts
Forget the Spoon blade, look at this about half way down the page:
http://www.erlperformance.com/produc...formance-parts
#23
Re: power of main bearings SPOON
Max[RUS], we are telling you. If you want SPOON, call SPOON. If you do not call SPOON then do not ask us for help. Research 11,000 RPM motors. Use B18C5 or B18C1 girdle. You must make this engine. We cannot make this engine for you.
I hope this message is OK through the translator.
I hope this message is OK through the translator.
#24
Re: power of main bearings SPOON
He's joking.
Forget the Spoon blade, look at this about half way down the page:
http://www.erlperformance.com/produc...formance-parts
Forget the Spoon blade, look at this about half way down the page:
http://www.erlperformance.com/produc...formance-parts
Thank you very much!
think about this option, since it even easier to implement but I find it a less attractive
Max[RUS], we are telling you. If you want SPOON, call SPOON. If you do not call SPOON then do not ask us for help. Research 11,000 RPM motors. Use B18C5 or B18C1 girdle. You must make this engine. We cannot make this engine for you.
I hope this message is OK through the translator.
I hope this message is OK through the translator.
Perfectly understand you, but you understand me because I'm an engineer I want to fully understand how to make and whether it will be worth the effort I spend on it and it might cost to put one block blade that shows the post above ...
#25
Re: power of main bearings SPOON
11,000 RPM motor is not normal. Normal engineering does not work. You can not know that 11,000 RPMs will make the parts resonate and vibrate. Only experience tells you how 11,000 RPMs affects the motor.