Go Back   Honda-Tech > Honda and Acura Technical Forums > All Motor/ Naturally Aspirated
Sign in using an external account
Register Forgot Password?
Search


Welcome to Honda-Tech!
Welcome to Honda-Tech.com.

You are currently viewing our forums as a guest, which gives you limited access to view most discussions and access our other features. By joining our community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join the Honda-Tech community today!


Reply
 
 
 
submit to reddit
 
LinkBack Thread Tools Search this Thread
Old 05-30-2005, 02:07 PM   #1
 
Yambor's Avatar
 
Join Date: Jan 2004
Location: rebuilding in, wv, United States
Posts: 1,122
iTrader Rating: (0)
Send a message via AIM to Yambor
Default N/A B18C1 Build Rotating Assy. Complete w/Pics


Engine Specs: Clearances Etc.

Piston Ring End Gap:

Top Compression Ring: .011" honda Spec: .008" - .014"

Second Compression Ring: .016" Honda Spec: .016" - .022"

Oil Rings: .008" Honda Spec: .008" - .020"

Piston Pin Weight: 85g
Piston Weight: 291g
Piston Dome Volume: 7.45cc


Main Bearing Clearances:

Honda Spec 1, 2, 4 & 5
.0009 - .0017

Result: .0015" for 2 , 4 / 1 & 5 ?

Honda Spec #3

.0012 - .0019"

Result: .0015"

Rod Bearing Clearances:

Honda Spec: .0013" - .0020"

Piston Diameter:81.5 mm Pistons

#1 , 2, 4 - 3.2050"
#3 3.2052"

PTW (Piston to Wall Clearance) Endyn Spec - .0026" -.027"
Block Bored to. 3.2076"

PTW = .0026"

Head Milled: .004"

Block Decked: .002"

2 Layer HG: .45mm

Static CR: 12.5:1

Result: .0016" ? i cant remember that well.

Combustion Chamber Volume: 41.3 cc, stock 41.6

Setup: Updated 5/23/06

-Endyn "Rollerwave" Pistons 81.5mm
-12.5:1 Static CR
-Skunk2 Stage 2 Cams
-Supertech Dual Valvesprings
-Supertech Race Valves Nitride Coated High Compression
-Supertech Magnease Bronze Valve Guides
-Supertech Titanium Retainers
-Alaniz "Competition" Cylinder Head Port
-Skunk2 Intake Manifold
-Hondata Intake Manifold Gasket
-AEBS Head Studs
-ARP Rod Bolts
-Spoon HG .45mm
-Milled .003"
-OEM Main & Rod Bearings & Thrust Washers
-OEM Bottom End Gasket Kit
-64mm TB Taper Bore


Fuel And Tuning:
-Walbro 190lph
-P28 ECU w/ HONDATA s300
-R/C 310's
-PLX M-300 Wideband

Overall Goal of 180-210 WHP and mid 13sec car.

Well heres some pics, all the rest i took didnt turn out right at all.

Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.

Update 3/15/05

Main Bearing Clearances

Well its been awhile since i last posted on this thread, so i finally got some plastigauge from the shop and decided to check the Main Bearing Clearances...

Main Bearing To Journal Oil Clearances # 1,2,4 & 5 Journals .0009 - .0017"
# 3 Journal - .0012 - .0019" ( Service Limit 1,2,4,&5 .020", and #3 .0024")

Main # 1 .0015"
Main # 2 .0015"
Main # 3. 0015"
Main # 4 .0015"
Main # 5 .0015"

Seems to be all the clearances are well in Honda spec.

Went ahead and also found out what kind of bearings needed..

Click the image to open in full size.

Letters Stamped On Block: BCBDD

Numbers On Crankshaft: 4 3 3 3 2

Results:
Brown, Brown, Green, Black, Green

Connecting Rod Bearings:

Letters Stamped On Crank: C C C C

Numbers Stamped On Rod: 3 3 3 3

Results:
All Brown

Main Bearing Set
2.013-2.010 mm 0.0793"-0.0791"
2.010-2.007 mm 0.0791"-0.0790"
2.007-2.004 mm 0.0790"-0.0789"
2.004-2.001 mm 0.0789"-0.0788"
2.001-1.998 mm 0.0788"-0.0787"
1.998-1.995 mm 0.0787"-0.0785"
1.995-1.922 mm 0.0785"-0.0757"

Conrod Bearing Set
1.510-1.507 mm 0.0594"-0.0593"
1.507-1.504 mm 0.0593"-0.0592"
1.504-1.501 mm 0.0592"-0.0591"
1.501-1.498 mm 0.0591"-0.0590"
1.498-1.495 mm 0.0590"-0.0589"
1.495-1.492 mm 0.0589"-0.0587"
1.492-1.489 mm 0.0587"-0.0586"


Modified by JH4DC4-2GSR at 8:03 PM 6/4/2005


Modified by JH4DC4-2GSR at 6:10 PM 6/5/2005


Modified by JH4DC4-2GSR at 6:00 PM 10/6/2005


Modified by Yambor at 8:12 PM 5/23/2006


Modified by Yambor at 7:15 PM 7/6/2006
__________________
[b]03' AP1 S2000 Spa Yellow[/b] //ViS//Tein//Cusco//K&N//HKS//AEM//Spoon
sold out - 2.0 gsr/h2b integra
[img]http://images.honda-tech.com/set1/smile/emthdown.gif[/img]
Yambor is offline   Reply With Quote
Old 05-30-2005, 02:09 PM   #2
 
Yambor's Avatar
 
Join Date: Jan 2004
Location: rebuilding in, wv, United States
Posts: 1,122
iTrader Rating: (0)
Send a message via AIM to Yambor
Default Re: N/A B18C1 Build (JH4DC4-2GSR)

UPDATE: 5/29/05

Well i have assembled the bottom end ,everything besides the pistons and rods, because i still waiting on my rod bearings to arrive from AZ. DHL takes 8 days to get them here, my AEBS Head Studs From CA and the rod bolts pressed in and rods resized along with wrist pins pressed in.

The build has went flawlessly so far and the crank turns beautifully. I installed new front and rear main seals also. I am using a craftsman toqrue wrench, the twist type, and tuesay after work i am bringing home my snap on dial type so i know for a fact that i am getting the correct torque.

Here are some pics of the install:

Checking ring gap, right on @ .009"
Click the image to open in full size.
The B18C1
Click the image to open in full size.
Plastigauge Results
Click the image to open in full size.
My Room
Click the image to open in full size.
Assembled
Click the image to open in full size.

I dont want to hear it about the bed, i took the covers off so they wouldnt get dirty so yea.. I like em anyway..
[Click the image to open in full size.ops:]

I have more pics i will post later on in the week..
__________________
[b]03' AP1 S2000 Spa Yellow[/b] //ViS//Tein//Cusco//K&N//HKS//AEM//Spoon
sold out - 2.0 gsr/h2b integra
[img]http://images.honda-tech.com/set1/smile/emthdown.gif[/img]
Yambor is offline   Reply With Quote
Old 05-30-2005, 02:13 PM   #3
Honda-Tech Member
 
unknown0001's Avatar
 
Join Date: Nov 2003
Posts: 8,963
iTrader Rating: (0)
Default Re: N/A B18C1 Build (JH4DC4-2GSR)

Very nice man Click the image to open in full size. Click the image to open in full size. Click the image to open in full size. Click the image to open in full size.
unknown0001 is offline   Reply With Quote
Old 05-30-2005, 02:31 PM   #4
 
Yambor's Avatar
 
Join Date: Jan 2004
Location: rebuilding in, wv, United States
Posts: 1,122
iTrader Rating: (0)
Send a message via AIM to Yambor
Default Re: N/A B18C1 Build (Mr.RHTuner)

Quote:
Originally Posted by Mr.RHTuner
Very nice man Click the image to open in full size. Click the image to open in full size. Click the image to open in full size. Click the image to open in full size.
Thanks man. Im kinda of throwing this thread together with posts from other threads that i did. Its sort of in order.. I have more pics i can post once i get the rods back and such.
__________________
[b]03' AP1 S2000 Spa Yellow[/b] //ViS//Tein//Cusco//K&N//HKS//AEM//Spoon
sold out - 2.0 gsr/h2b integra
[img]http://images.honda-tech.com/set1/smile/emthdown.gif[/img]
Yambor is offline   Reply With Quote
Old 05-30-2005, 03:51 PM   #5
 
Yambor's Avatar
 
Join Date: Jan 2004
Location: rebuilding in, wv, United States
Posts: 1,122
iTrader Rating: (0)
Send a message via AIM to Yambor
Default Re: N/A B18C1 Build (JH4DC4-2GSR)

Well i got back from the shop and he said that he can have the rods resized, rod bolts pressed in, wrist pins pressed in and ready by wednesday, that works out well because my rod bearings should be here by the third. that is the only thing holding me from completing the rotating assy.
__________________
[b]03' AP1 S2000 Spa Yellow[/b] //ViS//Tein//Cusco//K&N//HKS//AEM//Spoon
sold out - 2.0 gsr/h2b integra
[img]http://images.honda-tech.com/set1/smile/emthdown.gif[/img]
Yambor is offline   Reply With Quote
Old 05-30-2005, 04:22 PM   #6
Junior Member
 
HondaIntegraR's Avatar
 
Join Date: May 2004
Location: Fresno, Ca, USA
Posts: 524
iTrader Rating: (0)
Send a message via AIM to HondaIntegraR
Default Re: N/A B18C1 Build (JH4DC4-2GSR)

looks good, and good luck on your build, mine will be done in a few weeks also, can't wait
__________________
Friends don't let friends drive STOCK!
i Heart VTEC!

Vouches: Keebler65, Alternativeauto, FastSS, MrLover, Kteller8
HondaIntegraR is offline   Reply With Quote
Old 05-30-2005, 04:31 PM   #7
Honda-Tech Member
 
ALLMOTA92EG's Avatar
 
Join Date: Jan 2005
Location: oxnard, ca, us
Posts: 1,652
iTrader Rating: (0)
Send a message via AIM to ALLMOTA92EG
Default

so r you building that motor in your room?
__________________
94 Honda civic EG- NEW PROJECT
ALLMOTA92EG is offline   Reply With Quote
Old 05-30-2005, 04:41 PM   #8
 
Yambor's Avatar
 
Join Date: Jan 2004
Location: rebuilding in, wv, United States
Posts: 1,122
iTrader Rating: (0)
Send a message via AIM to Yambor
Default Re: (jdm92civichb)

Yep, sure am. The basement is way too dirty for such a build...
__________________
[b]03' AP1 S2000 Spa Yellow[/b] //ViS//Tein//Cusco//K&N//HKS//AEM//Spoon
sold out - 2.0 gsr/h2b integra
[img]http://images.honda-tech.com/set1/smile/emthdown.gif[/img]
Yambor is offline   Reply With Quote
Old 05-30-2005, 08:01 PM   #9
Junior Member
 
808_si's Avatar
 
Join Date: Apr 2005
Location: Hawaii
Posts: 991
iTrader Rating: (0)
Default

nice setup, engine block in your room. LoL.
__________________
HE>I
808_si is offline   Reply With Quote
Old 05-31-2005, 10:04 AM   #10
Honda-Tech Member
 
clint g's Avatar
 
Join Date: Jun 2004
Posts: 2,768
iTrader Rating: (0)
Default Re: (808_si)

Quote:
Originally Posted by 808_si
nice setup, engine block in your room. LoL.
I like it work where u can!
__________________
the port city its the hatch city now

My Vouches
johnnyseg/P-Dubb/jdmjeff/dohciv420/shaun/dreadedvtec/03SIHATCH/not so civic/SupaFly_Honda/ravinR68/t.blizzard/luudog55/gdrum/cloproductions/1slowcrx/phatcardesignz/cucharacha sports/ekay.jay/ gsrhb7/maxpsi/truehonda.com/BlueR/projectdc2

clint g is offline   Reply With Quote
Old 05-31-2005, 10:35 AM   #11
Honda-Tech Member
 
Danza's Avatar
 
Join Date: Jul 2004
Location: Lexington Park, MD
Posts: 2,971
iTrader Rating: (0)
Send a message via AIM to Danza
Default Re: (JH4DC4-2GSR)

Nice setup, but have you planned out how to get it out of your room already? Just a thought Click the image to open in full size.
__________________
Comments or Statements made using this screen name are frequently made in jest. These statements do not represent the position of any organization or entity and should not be taken as factual commentary on any topic, to include the author.
Danza is offline   Reply With Quote
Old 05-31-2005, 10:55 AM   #12
Member
 
SlepT ej6's Avatar
 
Join Date: Sep 2003
Location: NY
Posts: 1,159
iTrader Rating: (0)
Send a message via AIM to SlepT ej6
Default Re: (GreenGeezer01)

Quote:
Originally Posted by GreenGeezer01
Nice setup, but have you planned out how to get it out of your room already? Just a thought Click the image to open in full size.
Yes they tend to get a bit heavy once assembled Click the image to open in full size.

Click the image to open in full size. on the build!
__________________
LM 24
H1 P0ser
K20 EH2
SlepT ej6 is offline   Reply With Quote
Old 05-31-2005, 01:34 PM   #13
 
Yambor's Avatar
 
Join Date: Jan 2004
Location: rebuilding in, wv, United States
Posts: 1,122
iTrader Rating: (0)
Send a message via AIM to Yambor
Default Re: (GreenGeezer01)

Lol, get this, theres 13 stairs too!

Im pretty sure me and my dad can carry the block assembled downstairs, when i say assembled i mean. crank, rods pistons, oil pump etc. without the oil pan etc..

thanks for the responses..
__________________
[b]03' AP1 S2000 Spa Yellow[/b] //ViS//Tein//Cusco//K&N//HKS//AEM//Spoon
sold out - 2.0 gsr/h2b integra
[img]http://images.honda-tech.com/set1/smile/emthdown.gif[/img]
Yambor is offline   Reply With Quote
Old 06-01-2005, 04:30 PM   #14
 
Yambor's Avatar
 
Join Date: Jan 2004
Location: rebuilding in, wv, United States
Posts: 1,122
iTrader Rating: (0)
Send a message via AIM to Yambor
Default Re: (JH4DC4-2GSR)

Heres some pics of the pistons and rods resized with arp bolts...The caps have been put on ,and torqued to 40ft lbs 3 times, ( so the resizing can be done to the most accuracy)also the last time i put them on, i only need to torque it once and then check clearances.. he said he will lossen up the caps , as seen, because he said with arp bolts the caps are a pain to get off.. Come on Friday! Get paid and i get bearings!! woo hoot!!

Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
__________________
[b]03' AP1 S2000 Spa Yellow[/b] //ViS//Tein//Cusco//K&N//HKS//AEM//Spoon
sold out - 2.0 gsr/h2b integra
[img]http://images.honda-tech.com/set1/smile/emthdown.gif[/img]
Yambor is offline   Reply With Quote
Old 06-01-2005, 04:43 PM   #15
Honda-Tech Member
 
ALLphilthyDC2's Avatar
 
Join Date: Oct 2003
Location: ATS*GARAGE,CA
Posts: 974
iTrader Rating: (0)
Send a message via AIM to ALLphilthyDC2
Default Re: (SlepT ej6)

what type of header do you plan on using?
__________________
ATSxDPK = MIRACLE WHIPS | FRIENDS, FAMILY, GARAGE LIFE | WEK'SOS INDUSTRIES | IMPRM.COM
ALLphilthyDC2 is offline   Reply With Quote
Old 06-01-2005, 04:49 PM   #16
 
Yambor's Avatar
 
Join Date: Jan 2004
Location: rebuilding in, wv, United States
Posts: 1,122
iTrader Rating: (0)
Send a message via AIM to Yambor
Default Re: (Philthy415)

I have a DC Sports JDM ITR 4-1, on my ls now, and thats what i plan to use on this motor..

until i can save up for a nice header from smsp, hytech, or similar..
__________________
[b]03' AP1 S2000 Spa Yellow[/b] //ViS//Tein//Cusco//K&N//HKS//AEM//Spoon
sold out - 2.0 gsr/h2b integra
[img]http://images.honda-tech.com/set1/smile/emthdown.gif[/img]
Yambor is offline   Reply With Quote
Old 06-01-2005, 05:25 PM   #17
Member
 
RedEj8's Avatar
 
Join Date: May 2005
Location: Macon, GA, U.S.
Posts: 1,326
iTrader Rating: (0)
Send a message via AIM to RedEj8
Default Re: (JH4DC4-2GSR)

Looks great man!! Click the image to open in full size. Click the image to open in full size.
__________________
Poormans R- EJ8

EJ8 Squad #261
RedEj8 is offline   Reply With Quote
Old 06-03-2005, 06:38 AM   #18
Member
 
Lil Corb's Avatar
 
Join Date: Mar 2003
Location: NOVA, US
Posts: 1,090
iTrader Rating: (0)
Send a message via AIM to Lil Corb
Default Re: (reddohcvtec)

great info Click the image to open in full size. Click the image to open in full size. , keep us updated
__________________
1991 Eagle Talon TSI AWD (project car) 05 Evo 8 GSR (current) http://images.honda-tech.com/set1/smile/emwink.gif
NBP 02 DC5 (sold http://images.honda-tech.com/set1/smile/emsad.gif ) 2000 Milano Red EM1 (my baby, sold)
list goes on and on
Lil Corb is offline   Reply With Quote
Old 06-03-2005, 09:31 AM   #19
Honda-Tech Member
 
PostMASTER-S27's Avatar
 
Join Date: Apr 2004
Location: Lover of Cars, Shoes,and of course Pek Pek
Posts: 6,743
iTrader Rating: (0)
Send a message via AIM to PostMASTER-S27
Default Re: (Lil Corb)

Quote:
Originally Posted by Lil Corb
great info Click the image to open in full size. Click the image to open in full size. , keep us updated
Super clean setup.....good luck with everything!!
__________________
In Loving Memory VINCE "jdmEFsedan" PASCUA & Dru Carter.

Paksiw ll JDMtheory ll ATS-G ll JetSpeed ll Redzone
PostMASTER-S27 is offline   Reply With Quote
Old 06-03-2005, 02:43 PM   #20
Honda-Tech Member
 
redGSRguy's Avatar
 
Join Date: Sep 2001
Location: San Jose, CA
Posts: 3,677
iTrader Rating: (0)
Send a message via AIM to redGSRguy
Default Re: (JH4DC4-2GSR)

Damn looks good! Wish I knew all the car stuff. I'm saving up money and reading around here so I can get some new pistons in my car.
__________________
FS: JDM bumper + lip
redGSRguy is offline   Reply With Quote
Old 06-04-2005, 03:40 PM   #21
 
Yambor's Avatar
 
Join Date: Jan 2004
Location: rebuilding in, wv, United States
Posts: 1,122
iTrader Rating: (0)
Send a message via AIM to Yambor
Default Re: (redGSRguy)

Quote:
Originally Posted by redGSRguy
Damn looks good! Wish I knew all the car stuff. I'm saving up money and reading around here so I can get some new pistons in my car.
Thanks alot. I finally got my computer back today and i have some new pics of the bottom end assembled.

UPDATE 6/4/05
I had my rods the wrong way, so i ended up getting them flipped around for free, but other than that its been going very well..

I dropped the head off today...

Plans: (*) I have in possesion
-Milled .005"
-Skunk2 Dual Valvesprings *
-Skunk Titanium Retainers - ordering this week
-Spoon 2-Layer HG
-AEBS Head Studs *
-Skunk2 or Omnipower Valves
-OEM Honda Valve Seals *
-Bronze Valve guides if i feel stock ones are not good enough...

Will post pics later...
__________________
[b]03' AP1 S2000 Spa Yellow[/b] //ViS//Tein//Cusco//K&N//HKS//AEM//Spoon
sold out - 2.0 gsr/h2b integra
[img]http://images.honda-tech.com/set1/smile/emthdown.gif[/img]
Yambor is offline   Reply With Quote
Old 06-04-2005, 04:02 PM   #22
 
Yambor's Avatar
 
Join Date: Jan 2004
Location: rebuilding in, wv, United States
Posts: 1,122
iTrader Rating: (0)
Send a message via AIM to Yambor
Default Re: (JH4DC4-2GSR)

Update: 6/04/05

I have the rotating assy. completed. Went very well, checked clearances and all.. I just got the computer back today and figured i post some pics...I also found out that the suit bags or w.e you would like to call them from jc penny's that i used for my grad suit comes in very helpful while laying out parts and keeping the area clean..

I also dropped the head off today.. So all he is waiting on is me dropping off parts.. I fully disassembled the head last night to cut down on labor costs...

But on with the pics.. I have alot so i will post some at a time..

ummmm Peerrtyy..
Click the image to open in full size.
Complete!
Click the image to open in full size.
Endplay at minimal honda spec! gotta love it...
Click the image to open in full size.

__________________
[b]03' AP1 S2000 Spa Yellow[/b] //ViS//Tein//Cusco//K&N//HKS//AEM//Spoon
sold out - 2.0 gsr/h2b integra
[img]http://images.honda-tech.com/set1/smile/emthdown.gif[/img]
Yambor is offline   Reply With Quote
Old 06-04-2005, 06:45 PM   #23
Honda-Tech Member
 
philafelman's Avatar
 
Join Date: Mar 2002
Location: in this nutshell
Posts: 2,657
iTrader Rating: (0)
Default Re: (JH4DC4-2GSR)

just dont be cheap with rod bearings...i learned that the hard way. calico coated Click the image to open in full size. Click the image to open in full size.
__________________
FML
philafelman is offline   Reply With Quote
Old 06-04-2005, 08:42 PM   #24
 
Join Date: Apr 2004
Location: Placentia, CA, US
Posts: 821
iTrader Rating: (0)
Default Re: (JH4DC4-2GSR)

Looks good. Yummy in my tummy. Click the image to open in full size.
volcom40street is offline   Reply With Quote
Old 06-04-2005, 09:21 PM   #25
 
Yambor's Avatar
 
Join Date: Jan 2004
Location: rebuilding in, wv, United States
Posts: 1,122
iTrader Rating: (0)
Send a message via AIM to Yambor
Default Re: (philafelman)

Quote:
Originally Posted by philafelman
just dont be cheap with rod bearings...i learned that the hard way. calico coated Click the image to open in full size. Click the image to open in full size.
Shiat Son, OEM Honda Rod Bearings Here..
Click the image to open in full size.

Click the image to open in full size.

and my room! Click the image to open in full size.
Click the image to open in full size.
__________________
[b]03' AP1 S2000 Spa Yellow[/b] //ViS//Tein//Cusco//K&N//HKS//AEM//Spoon
sold out - 2.0 gsr/h2b integra
[img]http://images.honda-tech.com/set1/smile/emthdown.gif[/img]
Yambor is offline   Reply With Quote
 
 
 
submit to reddit
Reply

Tags
allmotor, b18c1, bearing, build, end, gap, honda, motor, oil, pan, piston, ring, rod, spec, specs, torque

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
B18C1, which color rod bearing?? aavtec All Motor/ Naturally Aspirated 10 05-17-2013 10:07 PM
Help with bearing size k24/eagle rods KdEj1 Tech/Misc 1 09-15-2012 07:12 PM
Rod Bearing Failure> clearance #(numbers) 94GSRMR Forced Induction 34 01-01-2011 07:05 PM
Are these main bearing clearances good? itslogz All Motor/ Naturally Aspirated 37 12-16-2008 08:12 PM
h22 bearing clearance 92hondalude Honda Prelude 3 11-25-2005 11:28 AM



All times are GMT -8. The time now is 04:00 AM.



2014 Copyright, InternetBrands Inc.
Powered by vBulletin® Version 3.8.7 AC1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.

Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.
Emails & Contact Details