My square port head
#5
Honda-Tech Member
Join Date: Jan 2003
Location: Charlotte, NC, USA
Posts: 1,080
Likes: 0
Received 0 Likes
on
0 Posts
porting looks nice ...
but good luck on the guides being ground on that way...
Im pretty sure they will crack ..
then break and your engine will have a a fun time with them
but good luck on the guides being ground on that way...
Im pretty sure they will crack ..
then break and your engine will have a a fun time with them
#6
Join Date: Jan 2004
Location: rebuilding in, wv, United States
Posts: 1,122
Likes: 0
Received 0 Likes
on
0 Posts
Re: (MAX_CFM)
that thing will actually flow? Exhaust scavenging affects? guides have been weakened alot, they probably will crack.. Looks like that head is trashed to me.. but im not too sure..
Trending Topics
#8
Honda-Tech Member
Join Date: Mar 2001
Location: North East
Posts: 4,295
Likes: 0
Received 0 Likes
on
0 Posts
Re: My square port head (cvp467)
Hope your motor is big enough to warrant something like that.. The 3 flow sheets I have seen on square ports were worse then some stock itr heads. With the exception of 1, but I cant validate if that paticular sheet was real or not.
#10
Honda-Tech Member
Join Date: Oct 2003
Location: Nor Cal, Ca, USA
Posts: 2,790
Likes: 0
Received 0 Likes
on
0 Posts
Re: (drchulo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by drchulo »</TD></TR><TR><TD CLASS="quote">flowbench numbers pllllllease</TD></TR></TABLE>
Flowbench numbers don't necessarily mean more power...it's the design and how the air is flowed threw the head, not just how MUCH air is flown threw the head. Make your ports too big, and you'll lose power and torque.
Flowbench numbers don't necessarily mean more power...it's the design and how the air is flowed threw the head, not just how MUCH air is flown threw the head. Make your ports too big, and you'll lose power and torque.
#14
Honda-Tech Member
iTrader: (1)
Join Date: Mar 2004
Location: los angeles, ca
Posts: 13,614
Likes: 0
Received 0 Likes
on
0 Posts
Re: My square port head (Rocket)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rocket »</TD></TR><TR><TD CLASS="quote">Alaniz?</TD></TR></TABLE>
#15
Junior Member
Thread Starter
Join Date: Sep 2004
Location: Puerto Rico
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Re: My square port head (advertise)
This head is for :
B18C 85X92
CP PISTONS 13.5:1
TODA C CAMS
and other stuff, a friend of mine build this head for me.He have flowbench in the shop but i dont have the sheet.
Sorry about my bad english, i need a translator.
B18C 85X92
CP PISTONS 13.5:1
TODA C CAMS
and other stuff, a friend of mine build this head for me.He have flowbench in the shop but i dont have the sheet.
Sorry about my bad english, i need a translator.
#17
Junior Member
Thread Starter
Join Date: Sep 2004
Location: Puerto Rico
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Re: My square port head (RMF)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RMF »</TD></TR><TR><TD CLASS="quote">Did you flow it @28"? If you did ,Can you remember what it was at .500 You puertoricano?I used to live in the condado plaza para dos anos.LOL Where all the cocolos with the toyotas with rotarys in em hung out.LOL</TD></TR></TABLE>jajajajjajaja
#20
B*a*n*n*e*d
Join Date: Apr 2003
Location: Nampa, ID, US
Posts: 7,532
Likes: 0
Received 0 Likes
on
0 Posts
Re: (5thgenallmotor)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 5thgenallmotor »</TD></TR><TR><TD CLASS="quote">almost looks like a 1st gen Dsm head....</TD></TR></TABLE>I was just saying in my head, looks kinda like my 4G63 head.
#21
Re: (SlowSpyder)
i wonder what a stock 1g dsm head would put out on a say 12.5:1 motor with itb's and a nice headder n sum cams of course.... ????? i've only seen one dsm engine with itb's on it, and it was a picture online of a white colt.
#22
Junior Member
Thread Starter
Join Date: Sep 2004
Location: Puerto Rico
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Re: (ModenaTwinTurbo)
esto es parte de mi setup
***UPDATE***
MY NEW RS MACHINES BLOCK
Modified by cvp467 at 6:47 PM 9/15/2005
Modified by cvp467 at 6:48 PM 9/15/2005
Modified by cvp467 at 6:54 PM 9/15/2005
Modified by cvp467 at 6:55 PM 9/15/2005
#25
Honda-Tech Member
Join Date: Jan 2003
Location: Molde, Norway
Posts: 1,791
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Speedz)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Speedz »</TD></TR><TR><TD CLASS="quote">whats the bore/stroke?</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cvp467 »</TD></TR><TR><TD CLASS="quote">This head is for :
B18C 85X92
CP PISTONS 13.5:1
TODA C CAMS
and other stuff, a friend of mine build this head for me.He have flowbench in the shop but i dont have the sheet.
Sorry about my bad english, i need a translator. </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cvp467 »</TD></TR><TR><TD CLASS="quote">This head is for :
B18C 85X92
CP PISTONS 13.5:1
TODA C CAMS
and other stuff, a friend of mine build this head for me.He have flowbench in the shop but i dont have the sheet.
Sorry about my bad english, i need a translator. </TD></TR></TABLE>