alex-wb

Hi, I've a civiv ek with b20/vtec swap, and I have problems with the cooling system, how I can bleed my sistem?. Thanks!

93egSLEEPER

There should be a bleeder valve on either the thermostat housing or the front water port on the head. Post a pic and let us see if we can help you find it.

Project_EK

iTrader: (1)

Not all heads are equipped with the bleeder screw. If you don't have one, simply take the rad cap off and start the car with the heat full blast. Let the car idle and keep topping off the rad with coolant until the fan kicks on. Once the fan kicks on, put the cap back on, your done.

wunfstgsr

^^^ This.