Gsr Block w/ 81.5 mm Bore. What size CTR pistons??
11-10-2005, 01:54 PM
#2
Honda-Tech Member
Join Date: Jul 2003
Location: albany, ny, usa
Posts: 2,271
Likes: 0
Received 0 Likes
on
0 Posts
Re: Gsr Block w/ 81.5 mm Bore. What size CTR pistons?? (kidd_drastic)
you want the 84 mm pistons, just heat up the block first and hammer them in there
11-10-2005, 02:53 PM
#4
Member
Re: Gsr Block w/ 81.5 mm Bore. What size CTR pistons?? (kidd_drastic)
No. If your bore is actually 81.5mm you need 81.5 pistons not 81.25mm pistons. Take it to someone with a inside micrometer.
11-10-2005, 03:26 PM
#5
Member
Thread Starter
Join Date: Jun 2005
Posts: 2,872
Likes: 0
Received 0 Likes
on
0 Posts
Re: Gsr Block w/ 81.5 mm Bore. What size CTR pistons?? (dohcMONSTER)
https://honda-tech.com/zerothread?id=1415277
so this is the wrong information for the block i bought.
so this is the wrong information for the block i bought.
11-10-2005, 03:47 PM
#6
Honda-Tech Member
Re: Gsr Block w/ 81.5 mm Bore. What size CTR pistons?? (kidd_drastic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kidd_drastic »</TD></TR><TR><TD CLASS="quote">I have a gsr block w/ 81.5 mm bore. i'm looking to get ctr pistons. Do i get the .25 oversized ctr pistons.</TD></TR></TABLE>
the info is right:
.020" or .5mm is the piston size the block was bored for.
therefore, you need .020 or .5mm pistons...easy as that. Just call me if you have any questions.
the info is right:
.020" or .5mm is the piston size the block was bored for.
therefore, you need .020 or .5mm pistons...easy as that. Just call me if you have any questions.
Trending Topics
11-11-2005, 12:39 PM
#8
Honda-Tech Member
Re: Gsr Block w/ 81.5 mm Bore. What size CTR pistons?? (PURPLETERROR aka BIGMATT)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PURPLETERROR aka BIGMATT »</TD></TR><TR><TD CLASS="quote">you want the 84 mm pistons, just heat up the block first and hammer them in there</TD></TR></TABLE>
Ha ha. Made my day.
Ha ha. Made my day.
Thread
Thread Starter
Forum
Replies
Last Post
