BUILT lSVTEC oil leak...from headgasket... - Honda-Tech

Go Back   > >
Log In 


BUILT lSVTEC oil leak...from headgasket...

Reply
 
 
 
LinkBack Thread Tools Search this Thread
Old 11-29-2011, 12:22 PM   #1
Honda-Tech Member
Thread Starter
 
cibao2ner's Avatar
 
Join Date: Nov 2007
Location: bronx, ny, usa
Posts: 1,465
Default BUILT lSVTEC oil leak...from headgasket...

i have a fully built lsvtec...all new gaskets...arps torqued in 3 steps to 80ftlbs....

i have a medium oil leak from the corner of headgasket...near the vtec solenoid....but oil looks clean and its just in the front of the engine...new gsr headgasket...new vtec solenoid gasket...i went to street tune and had to stop early cause rad fan went out...
cibao2ner is offline   Reply With Quote
Old 11-29-2011, 08:21 PM   #2
Honda-Tech Member
 
Join Date: Oct 2010
Location: westchester, NEW YORK
Posts: 48
Default Re: BUILT lSVTEC oil leak...from headgasket...

maybe try the golden eagle HG?.. and see wat happens..
ek3turbo is offline   Reply With Quote
Old 11-29-2011, 08:37 PM   #3
Honda-Tech Member
iTrader: ( 5 )
 
mouab18c1's Avatar
 
Join Date: Aug 2006
Location: Washington
Posts: 8,072
Default Re: BUILT lSVTEC oil leak...from headgasket...

You sure it's the HG and not from Vtec solenoid, cam plug, or distributor?
mouab18c1 is offline   Reply With Quote
Old 11-29-2011, 08:48 PM   #4
Honda-Tech Member
 
Fink29's Avatar
 
Join Date: Oct 2005
Location: Boston, Ma, USA
Posts: 758
Default Re: BUILT lSVTEC oil leak...from headgasket...

I would first re-torque the head and make sure you use some rtv on the cam seal above. Sometime after a few heat cycles you need to re-torque the arp studs.
Fink29 is offline   Reply With Quote
Old 11-29-2011, 09:18 PM   #5
Honda-Tech Member
iTrader: ( 5 )
 
mouab18c1's Avatar
 
Join Date: Aug 2006
Location: Washington
Posts: 8,072
Default Re: BUILT lSVTEC oil leak...from headgasket...

I have the same problem right now, I narrowed it down to the cam plug. GL
mouab18c1 is offline   Reply With Quote
Old 11-29-2011, 09:33 PM   #6
Honda-Tech Member
iTrader: ( 10 )
 
TheShodan's Avatar
 
Join Date: Jan 2002
Location: City of Wind, IL, USA
Posts: 18,997
Default Re: BUILT lSVTEC oil leak...from headgasket...

Could easily be cam seal or Vtec solenoid gasket
TheShodan is offline   Reply With Quote
Old 11-29-2011, 09:58 PM   #7
Honda-Tech Member
 
chingpo05's Avatar
 
Join Date: Apr 2006
Location: houston, tx, united states
Posts: 168
Default Re: BUILT lSVTEC oil leak...from headgasket...

it has been a prob for me for as long as ive been building these motors even with freshly decked heads and blocks. copper spray was my go to for the fix and since then every motor ive built havent had a leak
chingpo05 is offline   Reply With Quote
Old 11-29-2011, 10:15 PM   #8
Honda-Tech Member
 
Join Date: Jan 2009
Posts: 34
Default Re: BUILT lSVTEC oil leak...from headgasket...

You can also whipe up the oil clean it up then baby powder around where it was leaking and start the car drive it for a minute and it should reveal where your oil is escaping from...
acexxxoasis is offline   Reply With Quote
Old 11-30-2011, 08:08 AM   #9
Honda-Tech Member
 
Furyof4's Avatar
 
Join Date: Nov 2003
Location: SE, PA, usa
Posts: 1,742
Default Re: BUILT lSVTEC oil leak...from headgasket...

I always put a little hondabond on the oil drains for lsvtec's. If not they always seem to leak like you're describing. Double check the other possible sources though like others have mentioned.
Furyof4 is offline   Reply With Quote
Old 11-30-2011, 08:30 AM   #10
Honda-Tech Member
 
93egSLEEPER's Avatar
 
Join Date: Apr 2007
Location: Seahawks WA, USA
Posts: 7,516
Default Re: BUILT lSVTEC oil leak...from headgasket...

That leak I have come to know as the "vtec leak" I see just about every car with an LSV or that has had the head split from the block has that leak. I use honda bond around all the oil ports as an extra seal and have defeated it. The first rebuild I did I had the same problem.
93egSLEEPER is offline   Reply With Quote
Old 11-30-2011, 09:44 AM   #11
Honda-Tech Member
Thread Starter
 
cibao2ner's Avatar
 
Join Date: Nov 2007
Location: bronx, ny, usa
Posts: 1,465
Default Re: BUILT lSVTEC oil leak...from headgasket...

i used ultra grey around the oil returns on the head gasket.....and the cam seal is one of those 3 o-ring aftermarket ones that i also went over with ultra-grey...and everthing on the head side is clean...under cam seal and distributor and vtec solenoid...also head was resurface and so was the block...

i dont mind cleaning it up once in a while...i just dont wanna blow something...

if it can last till spring im ok with it so i can retorque the head...if i have to take of the head im gonna go with copper spray..
cibao2ner is offline   Reply With Quote
Old 11-30-2011, 12:16 PM   #12
Honda-Tech Member
iTrader: ( 1 )
 
per4mance's Avatar
 
Join Date: Jan 2004
Location: Huntsville, al
Posts: 1,607
Default Re: BUILT lSVTEC oil leak...from headgasket...

did you atleast install the plug into the bottom of the head? I know its a dumb question but you would be suprised how many people do not tap and plug the hole. I for one have never had an ls/vtec or b20/vtec leak anywhere when built. Sounds like a problem from the engine builder
per4mance is offline   Reply With Quote
Old 11-30-2011, 03:55 PM   #13
Honda-Tech Member
 
93egSLEEPER's Avatar
 
Join Date: Apr 2007
Location: Seahawks WA, USA
Posts: 7,516
Default Re: BUILT lSVTEC oil leak...from headgasket...

Since it hasn't been asked or put out there, what HG did you use?
93egSLEEPER is offline   Reply With Quote
Old 11-30-2011, 03:56 PM   #14
Honda-Tech Member
Thread Starter
 
cibao2ner's Avatar
 
Join Date: Nov 2007
Location: bronx, ny, usa
Posts: 1,465
Default Re: BUILT lSVTEC oil leak...from headgasket...

i made that mistake once already...installe the plug without any sealant....this time i did it right...

compression was even on all 4 cyl..so it cant be a bad headgasket...also the oil is clean not milky...
cibao2ner is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
cometic gasket now timing is off NC_jdmeg Forced Induction 8 02-11-2015 04:30 AM
LS/VTEC OIL LEAK. GooseS2000 All Motor / Naturally Aspirated 74 02-04-2014 09:44 AM
freeing up coolant/oil passages in headgasket Corksil Honda Civic / Del Sol (1992 - 2000) 9 06-09-2011 07:08 AM
ls-vtec headgasket? LS/VTEC TURBO Hybrid / Engine Swaps 36 03-20-2011 10:19 PM
replaced leaky headgasket, still leaking. HELP GSRCRXsi All Motor / Naturally Aspirated 21 08-16-2006 01:51 PM


Tags
95, cam, cap, civic, gasket, head, honda, leak, leaking, leaks, ls, lsvtec, oil, solenoid, vtec

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -8. The time now is 09:48 PM.



Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.