96_integralife

So I'm new to working on Hondas and I'm in a jam I have a b20 that I replaced all the upper end gaskets and adjusted the valves starts up and runs but has a very small misfire I replaced all spark plugs, wires, distributor, cap and rotor and I still can't figure it out it has gas and spark to

blackeg

any check engine codes?

what ecu are you using to run it?

93egSLEEPER

Misfire at idle or when driving?

EsotericImage

iTrader: (8)

24+hrs later and still no response from OP

prob using a P75 and no FPR and runiing lean as hell.

wunfstgsr

check your valve lash and timing.

PyroProblem

compression test and leakdown test numbers?

96_integralife

This will sound stupid but I figured it out that's for the help guys it ended up being an air bubble left in the fuel line