B20 ALLMOTOR NONVTEC street car 12.12 @ 111 World fastest????
Went to Cecil county dragway last night with my 91 CRX SI with an allmotor B20 nonvtec. Ran a
12.12 @ 111 with a 1.65 60'
The set up B20 stock bore, 13.1 Arias pistons, Crower rods, 00 B20 head race ported, Rev .20 over ss valves, Rev springs and retainers, Crower 405 cams, non ported Type - R intake, Type - R t-body, Header Tech Header, Tec II EMS. All the machine work done by KODD RACING ENGINES Hampstead Maryland
Still working some bugs out of it. Hoping to run 11's very soon.
I was wondering if its the fastest allmotor B20 nonvtec. If not I'd like to know who and how fast.
Re: B20 ALLMOTOR NONVTEC street car 12.12 @ 111 World fastest???? (nonvtecallmotor)
Originally Posted by nonvtecallmotor
The set up B20 stock bore, 13.1 Arias pistons, Crower rods, 00 B20 head race ported, Rev .20 over ss valves, Rev springs and retainers, Crower 405 cams, non ported Type - R intake, Type - R t-body, Header Tech Header, Tec II EMS.
nice set up.. 12.1! any dyno #'s?
<FONT COLOR="red">[B]Speed[/B]</FONT>: [B][I]" It's really about judgement and intelligence, so long as your brain can go faster than your going at any time, you're all right, and it isn't fast."[/I] [/B]
Im not done yet.... [img]http://images.honda-tech.com/set1/smile/emwink.gif[/img]
good job nonvtecallmotor... however we had a 94 integra LS that ran firstname.lastname@example.org with a 1.59 60 foot. back in 1997. it had stock sleeves. 82mm bore 11:1 compression, dpr full race head, gude full race cams, valvetrain, honda ecu retuned, 66mm throtle body 4 inch intake, type R intake manifold, and a gsr tranny, and a few other goodies.... Its been so long, I think you will beat that time shortly though if you keep trying.. good luck to you.
your information is wrong... it was a street race car only, untill it got sponsored by dpr...And no it did not run low 11 although it could have eventually. but the car was sold. and then shortly retired from racing. bottom line it was done 8 years ago. NON VTEC INTEGRA end of story..
Re: B20 ALLMOTOR NONVTEC street car 12.12 @ 111 World fastest???? (Manuel)
Damn now I kick myself for not taking out my 223whp/176wtq nonvtec B20 out to the track when I had it
[url="http://www.guitarpartscanada.com"][b]Guitar Parts Canada[/b][/url]
2001 Audi A4 1.8T quattro
[url="http://www.motorgeek.com/phpBB2/viewtopic.php?t=10266"]1990 Audi 200 Turbo Quattro[/url] megasquirted @ 23psi
[url="http://www.honda-tech.com/zerothread?id=1223568"]My Old DA[/url] (sold)
Re: B20 ALLMOTOR NONVTEC street car 12.12 @ 111 World fastest???? (towsondragcrx)
Originally Posted by towsondragcrx
with skinnies on the rear and running slicks? stop kidding yourself yeah you'll run streetclass but you trailer the car on your tow dolly, everyone that goes down to the parkway knows that.
Why only go half way? why not make it a full race car instead of trying to hold on to the title " street car " when deep down you know its not streetable? get serious.
You dont know WHAT THE **** YOUR TALKING ABOUT. I HAVE DRIVEN IT ON THE STREET MORE THEN ANY ******* CAR IN MY CLASS. I will drive it anywhere for the right amount of money. I STOPPED DRIVEN IT ON THE STREET BECAUSE ITS A COP MAGNIT. I ALSO HAVE ANOTHER CAR THAT I ONLY RUN ON THE STREET.
IF IT WAS A RACE CAR IT WOULD BE A HELL OF ALOT FASTER.
PS It didnt have skinnys on it when I made that pass.
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.