84mm b16 itbs going for 230whp and 0ftlbs
#105
Honda-Tech Member
Re: 84mm b16 itbs going for 230whp and 0ftlbs
Looks good man!
Are those old school 3 bolt aem gears with original hardware? If so, I'd at least put some lock washers or upgrade to some better bolts. Especially with aggressive aftermarket cams.
Keep it updated! I forgot about this thread!
Are those old school 3 bolt aem gears with original hardware? If so, I'd at least put some lock washers or upgrade to some better bolts. Especially with aggressive aftermarket cams.
Keep it updated! I forgot about this thread!
#106
Honda-Tech Member
Re: 84mm b16 itbs going for 230whp and 0ftlbs
Aem three bolts never failed us back in the day...
But that crank pulley is bad news in my experience! Maybe borderline for all motor and the timing marks are notoriously bad.
But that crank pulley is bad news in my experience! Maybe borderline for all motor and the timing marks are notoriously bad.
#107
Honda-Tech Member
Join Date: Apr 2008
Location: el paso, tx, usa
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
Re: 84mm b16 itbs going for 230whp and 0ftlbs
Im glad this build didnt die. Ive been watching for updates to see what it will do since my build is pretty close specs and isnt done yet either. haha
#110
Honda-Tech Member
Thread Starter
#113
Honda-Tech Member
Join Date: Apr 2008
Location: el paso, tx, usa
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
Re: 84mm b16 itbs going for 230whp and 0ftlbs
what mine ended up doing
built and tuned by dizzy engines el paso tx
b16a
benson sleeved & bored 84mm
12.5supertech pistons running about 11.5:1cr
scat rods
fully balanced with ati super dampner and 9lb flywheel
pnp gsr head
supertech valvetrain
skunk2 pro1s
victor-x im (gonna upgrade later)
custom intake
custom exhaust here- https://honda-tech.com/all-motor-nat...3194744/page2/
built and tuned by dizzy engines el paso tx
b16a
benson sleeved & bored 84mm
12.5supertech pistons running about 11.5:1cr
scat rods
fully balanced with ati super dampner and 9lb flywheel
pnp gsr head
supertech valvetrain
skunk2 pro1s
victor-x im (gonna upgrade later)
custom intake
custom exhaust here- https://honda-tech.com/all-motor-nat...3194744/page2/
#119
Honda-Tech Member
Re: 84mm b16 itbs going for 230whp and 0ftlbs
in for results!!
#120
Honda-Tech Member
Join Date: Aug 2005
Location: New York
Posts: 1,181
Likes: 0
Received 0 Likes
on
0 Posts
Re: 84mm b16 itbs going for 230whp and 0ftlbs
#123
Honda-Tech Member
Thread Starter
Re: 84mm b16 itbs going for 230whp and 0ftlbs
so i tuned it myself and i am no tuner, at all but its alive, made 226/150 @ 9500/6300 respectively. ill post the graph and some videos, ill have a proper tune on it in the next few weeks.
#124
Honda-Tech Member
Re: 84mm b16 itbs going for 230whp and 0ftlbs
Very nice! How high you spinning it?
Will be a good test of your tuning skills! Do any camshaft tuning as well?
Will be a good test of your tuning skills! Do any camshaft tuning as well?
#125
Honda-Tech Member
Thread Starter