How stock is my EP3's suspension?
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2008
Location: Olympia, WA, USA
Posts: 2,573
Likes: 0
Received 0 Likes
on
0 Posts
How stock is my EP3's suspension?
I have a 25ish mm (didn't exactly have a 25mm open end wrench) front sway bar, with extended ends that have moog printed on the zerk fitting boots.
I have a rear sway bar that pegs in at a ridiculously small 15mm. Both sway bars are a simple black color.
Are these stock on the 2003 Civic Si? (obviously the moog ends aren't.)
I have a rear sway bar that pegs in at a ridiculously small 15mm. Both sway bars are a simple black color.
Are these stock on the 2003 Civic Si? (obviously the moog ends aren't.)
#2
Honda-Tech Member
Re: How stock is my EP3's suspension?
sounds stock....the front is 25.5mm hollow and the rear for the 03 in 15mm solid....I put togather a little chart on another forum on swaybar size...
http://forums.clubep3.net/showthread.php?t=567637
Hope that helps.
http://forums.clubep3.net/showthread.php?t=567637
Hope that helps.
#5
Honda-Tech Member
Join Date: Feb 2005
Location: Oregon, USA
Posts: 1,439
Likes: 0
Received 0 Likes
on
0 Posts
Re: How stock is my EP3's suspension?
Moog is just a chassis parts company. Someone just replaced the stock endlinks most likely cause they went bad. Sounds stock. Buy a Progess sway bar combo and your life will be complete. Totally different car.
#7
Honda-Tech Member
Thread Starter
Join Date: Mar 2008
Location: Olympia, WA, USA
Posts: 2,573
Likes: 0
Received 0 Likes
on
0 Posts
Re: How stock is my EP3's suspension?
These have serviceable zerc's (sp) now. And I have a grease gun at work, so I don't think I'll have a problem with these going out.
Thread
Thread Starter
Forum
Replies
Last Post