diagram of an EP3 rear suspension from helms?
#2
I said I don't want a title!
Re: diagram of an EP3 rear suspension from helms? (95redLUDE)
I need to get off my butt and buy a helms for the car, but in the meantime is there anything that you need to know?
#3
Honda-Tech Member
Thread Starter
Join Date: Nov 2001
Location: previously 95redLUDE
Posts: 1,561
Likes: 0
Received 0 Likes
on
0 Posts
Re: diagram of an EP3 rear suspension from helms? (Todd00)
Well... I let my dumbass friend start working on the rear of the car while we were installing the Tein coilovers and he somehow put the 17mm bolt that connects the upper control arm in from the wrong direction and completely fuct up the threading. So.... I'm trying to figure out what the part number is for the upper control arm and I guess the bolt that I'll need because when I checked all the bolts (front/rear) today to make sure everything was snug, that bolt was starting to back out. Any help is much appreciated!
#4
I said I don't want a title!
Re: diagram of an EP3 rear suspension from helms? (95redLUDE)
Honestly, just buy a rear camber kit now (like the Ingalls) and don't bother spending the money on another oem Rear UCA. The RSX kits fit the EP3. You'll need to get the camber out of the rear sooner or later.
The dealership should be able to pull that bolt up on their microfiche. It's probably a $3 part.
The dealership should be able to pull that bolt up on their microfiche. It's probably a $3 part.
#5
Honda-Tech Member
Thread Starter
Join Date: Nov 2001
Location: previously 95redLUDE
Posts: 1,561
Likes: 0
Received 0 Likes
on
0 Posts
Re: diagram of an EP3 rear suspension from helms? (Todd00)
Thanks.... I found the Ingalls kit on inlinefour.com for about $170 (ouch) so I might just go ahead with that. Thanks for the help Todd00!
#6
I said I don't want a title!
Re: diagram of an EP3 rear suspension from helms? (95redLUDE)
The ingalls kit is a nice kit and works well. It includes all of the oem attachments for the ABS lines and such.
I just put one on my car a few weeks ago. I took roughly 1 degree of camber out of the rear and the car handles a lot better now.
I just put one on my car a few weeks ago. I took roughly 1 degree of camber out of the rear and the car handles a lot better now.
#7
Re: diagram of an EP3 rear suspension from helms? (Todd00)
Check my FS:7th gen civic parts.... I have a SPC front/rear camber kit for sale. I want $125 plus shipping...still in original package, used for about 10k miles.
Thread
Thread Starter
Forum
Replies
Last Post