***March FS/WTB Thread***
#1
Junior Member
Thread Starter
Join Date: Dec 2005
Location: Poughkeepsie, New York, United States
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
***March FS/WTB Thread***
For sale is two pair of mecca jeans. Both are the same 38 waist, 34 inseam. Never worn, one has tags still on it, the other i took off and threw away, thought i was going to keep them but never wear them. Went to return them and they wouldnt let me without the reciept. Heres your chance to get them cheap.
$17 shipped/paypaled each, willing to combine shipping
and still have these:
Us polo shorts-
Well I bought these a little big to "grow into" but ended up loosing about 20 lbs instead :mconfused: so I figured I would try and sell them to get some new, smaller sized ones that I can wear without holding my pants up the whole day. They each have been worn/washed like 5-6 times, no rips tears or stains. They are in excellent condition, and are authentic polo not some street knock offs. Waist is 40 inches and the inseam measures 12 inches. $12/pair , will combine shipped on multiple pairs.
$17 shipped/paypaled each, willing to combine shipping
and still have these:
Us polo shorts-
Well I bought these a little big to "grow into" but ended up loosing about 20 lbs instead :mconfused: so I figured I would try and sell them to get some new, smaller sized ones that I can wear without holding my pants up the whole day. They each have been worn/washed like 5-6 times, no rips tears or stains. They are in excellent condition, and are authentic polo not some street knock offs. Waist is 40 inches and the inseam measures 12 inches. $12/pair , will combine shipped on multiple pairs.
#2
Honda-Tech Member
Join Date: May 2008
Location: Pacific Northwest
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
Re: For Sale/Wanted Thread for December 2008
Just had a quick question so thought id post here. (on other site people hate "how much" posts)
How much do you think an 03 RSX type-s with 60k miles and the only mod being foglights would go for? (M/T) My friend keeps saying he can sell his car for 18k but im thinking 15-16 at most.
By the way I tryed KBB but they had every other model but the RSX.
How much do you think an 03 RSX type-s with 60k miles and the only mod being foglights would go for? (M/T) My friend keeps saying he can sell his car for 18k but im thinking 15-16 at most.
By the way I tryed KBB but they had every other model but the RSX.
#4
Surje.motorsports
Join Date: Aug 2007
Location: mechanicsburg, pa, usa
Posts: 3,523
Likes: 0
Received 0 Likes
on
0 Posts
Re: For Sale/Wanted Thread for December 2008
Just had a quick question so thought id post here. (on other site people hate "how much" posts)
How much do you think an 03 RSX type-s with 60k miles and the only mod being foglights would go for? (M/T) My friend keeps saying he can sell his car for 18k but im thinking 15-16 at most.
By the way I tryed KBB but they had every other model but the RSX.
How much do you think an 03 RSX type-s with 60k miles and the only mod being foglights would go for? (M/T) My friend keeps saying he can sell his car for 18k but im thinking 15-16 at most.
By the way I tryed KBB but they had every other model but the RSX.
just as an example, i bought my 02 type-s with 52xxx on the clock almost a year ago for $13000
#5
Honda-Tech Member
Join Date: May 2008
Location: Pacific Northwest
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
#6
Honda-Tech Member
Join Date: Feb 2005
Location: CA
Posts: 1,183
Likes: 0
Received 0 Likes
on
0 Posts
Re: For Sale/Wanted Thread for December 2008
no leaks no cracks used it for 4K
225 im in riverside CA
and 06 TYPE S deck lid spoiler needs paint $60
DC5 type r valve cover 140
Call me 951 208 3689
http://img505.imageshack.us/my.php?i...oto1247rs7.jpg
http://img505.imageshack.us/my.php?i...oto1254pt8.jpg
225 im in riverside CA
and 06 TYPE S deck lid spoiler needs paint $60
DC5 type r valve cover 140
Call me 951 208 3689
http://img505.imageshack.us/my.php?i...oto1247rs7.jpg
http://img505.imageshack.us/my.php?i...oto1254pt8.jpg
Trending Topics
#9
Honda-Tech Member
Join Date: Dec 2006
Location: Dallas Texas
Posts: 989
Likes: 0
Received 0 Likes
on
0 Posts
Re: For Sale/Wanted Thread for December 2008
no leaks no cracks used it for 4K
225 im in riverside CA
and 06 TYPE S deck lid spoiler needs paint $60
DC5 type r valve cover 140
Call me 951 208 3689
http://img505.imageshack.us/my.php?i...oto1247rs7.jpg
http://img505.imageshack.us/my.php?i...oto1254pt8.jpg
225 im in riverside CA
and 06 TYPE S deck lid spoiler needs paint $60
DC5 type r valve cover 140
Call me 951 208 3689
http://img505.imageshack.us/my.php?i...oto1247rs7.jpg
http://img505.imageshack.us/my.php?i...oto1254pt8.jpg
#10
Re: For Sale/Wanted Thread for December 2008
Hi, I have set rear dampers for sale, covered 120miles so like new. They fit both, EP3 or DC5 so if you are buying, please specify which one you have and i can put right lower bushings on them, (DC5 is a bit wider)
Springs are 8K and these have a special "Green Chromate" Coating, which is twice as hard as a standard.
If you want to build very good suspension setup, here is DA´s for CHEAP and you can buy front coilovers elsewhere. These have height and stiffness tune possibility.
These come without upper mounts, but you can use standard honda OEM, or buy upper mounts separate.
Selling because i have full Fightex EX suspension and these came for freen no use for me..
http://todaracingusa.com/category?secti ... d=15&id=72
I CAN ALSO SWAP STRAIGHT TO RBC INTAKE MANIFOLD WITH KARCEPTS ADAPTER AND PRE MODIFIED TO FIT!
So if you have not RBC to trade, these are 300$ and discuss delivery separate
ALL CONTACTS PM ME
If you are interest my EP3-R project, visit my homepage http://o6genhb.1g.fi/kuvat/Photoshoot%2016.7.2008/
Springs are 8K and these have a special "Green Chromate" Coating, which is twice as hard as a standard.
If you want to build very good suspension setup, here is DA´s for CHEAP and you can buy front coilovers elsewhere. These have height and stiffness tune possibility.
These come without upper mounts, but you can use standard honda OEM, or buy upper mounts separate.
Selling because i have full Fightex EX suspension and these came for freen no use for me..
http://todaracingusa.com/category?secti ... d=15&id=72
I CAN ALSO SWAP STRAIGHT TO RBC INTAKE MANIFOLD WITH KARCEPTS ADAPTER AND PRE MODIFIED TO FIT!
So if you have not RBC to trade, these are 300$ and discuss delivery separate
ALL CONTACTS PM ME
If you are interest my EP3-R project, visit my homepage http://o6genhb.1g.fi/kuvat/Photoshoot%2016.7.2008/
#12
Re: For Sale/Wanted Thread for December 2008
I have one civic type-r ep3 OEM passenger side airbag which want to trade something useful, so if you have spare DC5-R or EP3-R valve cover and want to trade it straight to this, PM me
#13
Re: For Sale/Wanted Thread for December 2008
WTB:
One (1) Bumper Light Cover, Passenger Side
EP3 (2004-2005)
Don't need the wiring. Just the plastic light cover. This is not the sidemarker, it's the long plastic light in front of the wheel, below the headlights.
Thanks.
One (1) Bumper Light Cover, Passenger Side
EP3 (2004-2005)
Don't need the wiring. Just the plastic light cover. This is not the sidemarker, it's the long plastic light in front of the wheel, below the headlights.
Thanks.
#14
Junior Member
Join Date: Jul 2006
Location: st eustache, qc, canada
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
#15
Re: For Sale/Wanted Thread for December 2008
02-04 base rsx front sway bar w/bushings $20
02-04 itr front strut bar $20
02-04 base rsx prop valve- $40
02-04 base rsx passenger rear knuckle- $40
02-04 rsx brake cables- $50
02-04 mud flaps (f&r)- $40
rsx ABS sensors- $50ea or $180/4
dc5 ITR rear knuckles, hub, lower and upper control arm, caliper (rear setup from brembo conversion minus rotors)- $300
mugen replica front strut bar- $50
BNIB honda integra iS rear 'H' badge- $25
02-04 itr front strut bar $20
02-04 base rsx prop valve- $40
02-04 base rsx passenger rear knuckle- $40
02-04 rsx brake cables- $50
02-04 mud flaps (f&r)- $40
rsx ABS sensors- $50ea or $180/4
dc5 ITR rear knuckles, hub, lower and upper control arm, caliper (rear setup from brembo conversion minus rotors)- $300
mugen replica front strut bar- $50
BNIB honda integra iS rear 'H' badge- $25
#16
Honda-Tech Member
Join Date: Apr 2005
Location: PA, USA
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
Re: For Sale/Wanted Thread for December 2008
WTB: Stock OEM RSX Type-S CD player (6-disc changer) for 2003 RSX. Looking for one in good-great condition. No worn buttons or blemishes! Ebay wants too much money... Email me kev0220@hotmail.com.
#19
Honda-Tech Member
Join Date: Jan 2008
Location: SEATTLE
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Re: For Sale/Wanted Thread for December 2008
Well had no luck finding a local buyer in hawaii...
up for sale is a damaged authentic mugen lip... cracked along the bodyline but still repairable.. theres some scratches underneath the lip from wear and tear (lowered).. the adhesive tapes inside the lip have are still usable as i never peeled it. This is made of polyurethane. Can pretty much glue it back into its place for a quick ghetto fix or have it repaired for cheap. Don't need it since I already got a new one. I have all the necessary screws too.
Gonna shrink wrap it and package it up this week.
I'll use whichever shipping carrier the buyer prefers.
180 + shipping
up for sale is a damaged authentic mugen lip... cracked along the bodyline but still repairable.. theres some scratches underneath the lip from wear and tear (lowered).. the adhesive tapes inside the lip have are still usable as i never peeled it. This is made of polyurethane. Can pretty much glue it back into its place for a quick ghetto fix or have it repaired for cheap. Don't need it since I already got a new one. I have all the necessary screws too.
Gonna shrink wrap it and package it up this week.
I'll use whichever shipping carrier the buyer prefers.
180 + shipping
#21
Junior Member
Join Date: Mar 2008
Location: los angeles, c, u.s
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
Re: For Sale/Wanted Thread for December 2008
Im selling arctic blue Greddy/Trust side skirts....
fits perfect and was color matched painted...
OR will trade for oem side skirts but must be artic blue...
Im asking 200 obo
call 626-232-3725
fits perfect and was color matched painted...
OR will trade for oem side skirts but must be artic blue...
Im asking 200 obo
call 626-232-3725
#22
Honda-Tech Member
Join Date: Apr 2007
Location: Northeast Pa
Posts: 361
Likes: 0
Received 0 Likes
on
0 Posts
FS Crower dual springs NIB for K20A2
For sale, NIB Crower dual valve springs for he RSX Vtec K20A2
part number 68189-16
picts avil on request, email me at liukang187@yahoo.com
Asking price 120 plus shipping
part number 68189-16
picts avil on request, email me at liukang187@yahoo.com
Asking price 120 plus shipping
#23
Honda-Tech Member
Join Date: Dec 2006
Location: Dallas Texas
Posts: 989
Likes: 0
Received 0 Likes
on
0 Posts
Re: For Sale/Wanted Thread for December 2008
02-04 base rsx front sway bar w/bushings $20
02-04 itr front strut bar $20
02-04 base rsx prop valve- $40
02-04 base rsx passenger rear knuckle- $40
02-04 rsx brake cables- $50
02-04 mud flaps (f&r)- $40
rsx ABS sensors- $50ea or $180/4
dc5 ITR rear knuckles, hub, lower and upper control arm, caliper (rear setup from brembo conversion minus rotors)- $300
mugen replica front strut bar- $50
BNIB honda integra iS front 'H' badge- $25
02-04 itr front strut bar $20
02-04 base rsx prop valve- $40
02-04 base rsx passenger rear knuckle- $40
02-04 rsx brake cables- $50
02-04 mud flaps (f&r)- $40
rsx ABS sensors- $50ea or $180/4
dc5 ITR rear knuckles, hub, lower and upper control arm, caliper (rear setup from brembo conversion minus rotors)- $300
mugen replica front strut bar- $50
BNIB honda integra iS front 'H' badge- $25
Well had no luck finding a local buyer in hawaii...
up for sale is a damaged authentic mugen lip... cracked along the bodyline but still repairable.. theres some scratches underneath the lip from wear and tear (lowered).. the adhesive tapes inside the lip have are still usable as i never peeled it. This is made of polyurethane. Can pretty much glue it back into its place for a quick ghetto fix or have it repaired for cheap. Don't need it since I already got a new one. I have all the necessary screws too.
Gonna shrink wrap it and package it up this week.
I'll use whichever shipping carrier the buyer prefers.
180 + shipping
up for sale is a damaged authentic mugen lip... cracked along the bodyline but still repairable.. theres some scratches underneath the lip from wear and tear (lowered).. the adhesive tapes inside the lip have are still usable as i never peeled it. This is made of polyurethane. Can pretty much glue it back into its place for a quick ghetto fix or have it repaired for cheap. Don't need it since I already got a new one. I have all the necessary screws too.
Gonna shrink wrap it and package it up this week.
I'll use whichever shipping carrier the buyer prefers.
180 + shipping
you can buy them cheaper than this new and not broken....just an fyi
#24
Honda-Tech Member
Join Date: Feb 2008
Location: DANBURY, CT, UNITED STATS
Posts: 662
Likes: 0
Received 2 Likes
on
2 Posts
Re: For Sale/Wanted Thread for December 2008
i have an 06 civic si oem lsd. it has 30k on it. pretty sure it will fit rsx trans. i take it apart and inspected all parts are in good condition. make me an offer