What tool to set lsd bearing preload?
01-30-2003, 11:41 PM
#1
Thread Starter
Join Date: Jan 2002
Location: canada
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
What tool to set lsd bearing preload?
i'm trying to set the carrier bearing preload but what do you use to connect the lsd to the torque wrench?
the one that splines into the lsd?
the one that splines into the lsd?
01-31-2003, 05:58 AM
#2
I forgot more about hondas then you will ever know....
Join Date: Feb 2001
Location: hop,skip, and a jump from the city,, new friggin york, USA
Posts: 5,310
Likes: 0
Received 1 Like
on
1 Post
Re: What tool to set lsd bearing preload? (Steady)
i use the ATS lsd tools. kinda tough to tell from the pic, but basically it is a splined shaft that has the axle splines on one side, and a hex head on the other.
01-31-2003, 08:52 AM
#3
Honda-Tech Member
Re: What tool to set lsd bearing preload? (rodney)
NICE!
an inexpensive solution might be to grab a broken axle's endpiece from a salvage yard, then grind a square on the non-splined end to fit a socket onto.
whallah, DIY preload torque wrench setup...
an inexpensive solution might be to grab a broken axle's endpiece from a salvage yard, then grind a square on the non-splined end to fit a socket onto.
whallah, DIY preload torque wrench setup...
Thread
Thread Starter
Forum
Replies
Last Post
