what is the head oil control orifice and o-ring?
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2003
Location: vancouver, bc, canada
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
what is the head oil control orifice and o-ring?
what is the head oil control orifice and o-ring?
i mean, whats its function, does anyone has a picture of it on their block.
to change it, does it require cylinder head removal??
thanks for the info
i mean, whats its function, does anyone has a picture of it on their block.
to change it, does it require cylinder head removal??
thanks for the info
#2
Member
Join Date: Feb 2000
Location: Philly, PA, USA
Posts: 3,887
Likes: 0
Received 0 Likes
on
0 Posts
Re: what is the head oil control orifice and o-ring? (yeungkaho)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by yeungkaho »</TD></TR><TR><TD CLASS="quote">
to change it, does it require cylinder head removal??
</TD></TR></TABLE>
Yes. And amazingly, it controls (restricts) oil flow to the cylinder head from the main oil galley downstream of the filter.
to change it, does it require cylinder head removal??
</TD></TR></TABLE>
Yes. And amazingly, it controls (restricts) oil flow to the cylinder head from the main oil galley downstream of the filter.
#3
Honda-Tech Member
Join Date: Apr 2004
Location: PA
Posts: 1,094
Likes: 0
Received 0 Likes
on
0 Posts
Re: what is the head oil control orifice and o-ring? (D)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by D »</TD></TR><TR><TD CLASS="quote">Yes. And amazingly, it controls (restricts) oil flow to the cylinder head from the main oil galley downstream of the filter.</TD></TR></TABLE>
D rocks
D rocks
#4
Honda-Tech Member
Thread Starter
Join Date: Sep 2003
Location: vancouver, bc, canada
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
so if it is plugged what would happen, or if it doesnt restrict oil?
my ITR dun have vtec now, everything is working, except, i do no have oil pressure going to the vtec solenoid, i have a lil bit of oil, but very little. when i plug in my oil pressure guage, it doesnt even register anything, do you thk this oil orifice have anything to do with it?
i just rebuild my engine btw. the cylinder head was sent to machine shop to have the valves replaced, entire engine has been cleaned. and i assembled it myself, the cylinder head has been overhauld by machine shop.
my ITR dun have vtec now, everything is working, except, i do no have oil pressure going to the vtec solenoid, i have a lil bit of oil, but very little. when i plug in my oil pressure guage, it doesnt even register anything, do you thk this oil orifice have anything to do with it?
i just rebuild my engine btw. the cylinder head was sent to machine shop to have the valves replaced, entire engine has been cleaned. and i assembled it myself, the cylinder head has been overhauld by machine shop.
#6
Member
Join Date: Feb 2000
Location: Philly, PA, USA
Posts: 3,887
Likes: 0
Received 0 Likes
on
0 Posts
Re: (yeungkaho)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by yeungkaho »</TD></TR><TR><TD CLASS="quote">i just rebuild my engine btw. the cylinder head was sent to machine shop to have the valves replaced, entire engine has been cleaned. </TD></TR></TABLE>
Define 'cleaned'. Hot tanked? Bead blasted? Short block reassembled? block decked?
Define 'cleaned'. Hot tanked? Bead blasted? Short block reassembled? block decked?
#7
Honda-Tech Member
Thread Starter
Join Date: Sep 2003
Location: vancouver, bc, canada
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
i do not have pic of my block now.
block was disassembled and hot tanked.
machine shop reinstalled everything on the block except for the crank bearing piston.
cylinder head was hot tanked also, the head was resurfaced, all the lifters, springs was old.
Modified by yeungkaho at 2:24 AM 4/19/2007
block was disassembled and hot tanked.
machine shop reinstalled everything on the block except for the crank bearing piston.
cylinder head was hot tanked also, the head was resurfaced, all the lifters, springs was old.
Modified by yeungkaho at 2:24 AM 4/19/2007
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Sep 2003
Location: vancouver, bc, canada
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Re: (yeungkaho)
some pic i found on the internet
so back to the main question,
Does the head oil control orifice affect vtec?
thats what i really want to know
also, anyone have or know where can i find service manual for ITR.
i use both mitchell and all data...but sometimes they lack some itr specific stuff.
Modified by yeungkaho at 2:58 AM 4/19/2007
so back to the main question,
Does the head oil control orifice affect vtec?
thats what i really want to know
also, anyone have or know where can i find service manual for ITR.
i use both mitchell and all data...but sometimes they lack some itr specific stuff.
Modified by yeungkaho at 2:58 AM 4/19/2007
#9
Member
Join Date: Feb 2000
Location: Philly, PA, USA
Posts: 3,887
Likes: 0
Received 0 Likes
on
0 Posts
Re: (yeungkaho)
Oil control orifice located between 2 &3, on intake side. In pictures 1 and 3, it is shown installed, on pic 2, it is removed.
Back to cleaning... were the block and head bead blasted? If so, did you check all oil passages and blow them all clean?
And yes... the oil control orrifice controls oil flow into the head. Do you see any other passages on the deck of the block that aren't headbolts, cooling passages, or oil drains?
Back to cleaning... were the block and head bead blasted? If so, did you check all oil passages and blow them all clean?
And yes... the oil control orrifice controls oil flow into the head. Do you see any other passages on the deck of the block that aren't headbolts, cooling passages, or oil drains?
#11
Honda-Tech Member
Join Date: Aug 2001
Location: VirNgOiVnAia
Posts: 4,696
Likes: 0
Received 0 Likes
on
0 Posts
Re: (yeungkaho)
What are you showing us with those pics? Its there in you block...
Did you answer D's questions?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by D »</TD></TR><TR><TD CLASS="quote">Oil control orifice located between 2 &3, on intake side. In pictures 1 and 3, it is shown installed, on pic 2, it is removed.
Back to cleaning... were the block and head bead blasted? If so, did you check all oil passages and blow them all clean?
And yes... the oil control orrifice controls oil flow into the head. Do you see any other passages on the deck of the block that aren't headbolts, cooling passages, or oil drains?</TD></TR></TABLE>
Did you answer D's questions?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by D »</TD></TR><TR><TD CLASS="quote">Oil control orifice located between 2 &3, on intake side. In pictures 1 and 3, it is shown installed, on pic 2, it is removed.
Back to cleaning... were the block and head bead blasted? If so, did you check all oil passages and blow them all clean?
And yes... the oil control orrifice controls oil flow into the head. Do you see any other passages on the deck of the block that aren't headbolts, cooling passages, or oil drains?</TD></TR></TABLE>
#16
Honda-Tech Member
Thread Starter
Join Date: Sep 2003
Location: vancouver, bc, canada
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
i found a easier way....took a blow gun....blow in the hole, have someone cover one of the oil passage hole on the left hand side, the air pressure pushes the oil orifice up by itself....looked at the oil orifice...nth special....o-ring intact.....on to diagnosing something else...
snapped a few pic, will upload later as i have a few question to ask...
can someone telll me which hole on the cylinder head(head gasketside) does the oil feed into the head....i know the oil orifice hole does, but what else?
snapped a few pic, will upload later as i have a few question to ask...
can someone telll me which hole on the cylinder head(head gasketside) does the oil feed into the head....i know the oil orifice hole does, but what else?
#18
Honda-Tech Member
Thread Starter
Join Date: Sep 2003
Location: vancouver, bc, canada
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Re: (yeungkaho)
After more diagnosis, the oil orifice seems normal.
On to diagnosing the vtec solenoid and its nearby passage.
In this image, for some reason the vtec rocker arm locks to the left rocker, and doesnt llock to the right rocker, all the cylinder is like this, is it normal?
Some more labeling, I dont understand the function if each hole in this picture. any help will greatly help me in diagnosing this problem
A pic of the actual solenoid, the round "pusher" moves freely
On to diagnosing the vtec solenoid and its nearby passage.
In this image, for some reason the vtec rocker arm locks to the left rocker, and doesnt llock to the right rocker, all the cylinder is like this, is it normal?
Some more labeling, I dont understand the function if each hole in this picture. any help will greatly help me in diagnosing this problem
A pic of the actual solenoid, the round "pusher" moves freely
#21
Honda-Tech Member
Thread Starter
Join Date: Sep 2003
Location: vancouver, bc, canada
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
updat* check all that i can think of, couldn't find anything, now, i have one last thing to check but need you opinion, theres this rail on top of the cam that transfer oil on top of my cyl head, but the problem is that the oil hole on the rail is reallly really small.....i cant clean things out, any idea how you guys do it??
#22
Re: (yeungkaho)
u got no o rings man u need to get those
i think i have same problem as u no vtec. i loose pressure when my solenoid opens up. i have LSVTEc so i have some oil pressure to the head. i got no O ring too. gettin one tomorrow. i will update. but u need to get those o rings. its dowel pin and rubber o-rings.
i think i have same problem as u no vtec. i loose pressure when my solenoid opens up. i have LSVTEc so i have some oil pressure to the head. i got no O ring too. gettin one tomorrow. i will update. but u need to get those o rings. its dowel pin and rubber o-rings.
Thread
Thread Starter
Forum
Replies
Last Post
*Boostwerks*
Honda CRX / EF Civic (1988 - 1991)
4
10-02-2003 11:32 AM