SMSP high flow cat
10-16-2008, 03:58 PM
#4
Honda-Tech Member
Join Date: Aug 2001
Location: VirNgOiVnAia
Posts: 4,696
Likes: 0
Received 0 Likes
on
0 Posts
Re: SMSP high flow cat (LH-93)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LH-93 »</TD></TR><TR><TD CLASS="quote">is his username on here SMSP???
</TD></TR></TABLE>
Yes
</TD></TR></TABLE>
Yes
Trending Topics
10-17-2008, 08:15 AM
#8
Honda-Tech Member
iTrader: (1)
Join Date: Feb 2006
Location: NJ
Posts: 2,351
Likes: 0
Received 0 Likes
on
0 Posts
as long as the header you have on is stock or USDM length, then it should bolt right up....
SMSP cats come in different lengths also, so you can get a 12 inch or 16 inch...universal ones, or you can get a direct fit...
With the direct fits, you dont have the choice of bigger inlet and outlet diameters, you just get the stock 2.25 inch.
SMSP cats come in different lengths also, so you can get a 12 inch or 16 inch...universal ones, or you can get a direct fit...
With the direct fits, you dont have the choice of bigger inlet and outlet diameters, you just get the stock 2.25 inch.
10-17-2008, 08:19 AM
#9
Honda-Tech Member
iTrader: (1)
Join Date: Feb 2006
Location: NJ
Posts: 2,351
Likes: 0
Received 0 Likes
on
0 Posts
since the t1r exhaust 2.5 inch diameter piping, you will need to get a cat that will have either a 2.25 inlet/2.5 outlet ( if you have stock header) or you have to order a 2.5 inch inlet/2.5 outlet ( if you have an aftermarket header with a 2.5 inch collector)
The length of the cat would depend on the header strictly...
The length of the cat would depend on the header strictly...
10-18-2008, 11:34 AM
#12
Re: (LH-93)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LH-93 »</TD></TR><TR><TD CLASS="quote">Once i install this stuff am i going to get a CEL because of the new exhaust.
If so what should the code be??</TD></TR></TABLE>
You shouldn't get a CEL your exhaust? Just make sure the the cat is for an ODBII vehicle with an O2 sensor bung before and after the cat.
If so what should the code be??</TD></TR></TABLE>
You shouldn't get a CEL your exhaust? Just make sure the the cat is for an ODBII vehicle with an O2 sensor bung before and after the cat.
10-19-2008, 09:07 AM
#17
Honda-Tech Member
Join Date: Apr 2006
Location: Buffalo, NY, USA
Posts: 3,959
Likes: 0
Received 0 Likes
on
0 Posts
Re: (eluam)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eluam »</TD></TR><TR><TD CLASS="quote">I've got a SMSP high flow cat and love it. </TD></TR></TABLE>
10-19-2008, 09:09 AM
#18
Re: (LH-93)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LH-93 »</TD></TR><TR><TD CLASS="quote">I talked to Dave at SMSP he got me all set up.
now about the o2 sensor????</TD></TR></TABLE>
On ODBII vehicles, there are two O2 sensors. One before the cat, and one post cat. When you order the cat from Dave, specify that you will need both bungs.
now about the o2 sensor????</TD></TR></TABLE>
On ODBII vehicles, there are two O2 sensors. One before the cat, and one post cat. When you order the cat from Dave, specify that you will need both bungs.
10-19-2008, 10:33 AM
#19
Senior Member
Thread Starter
Join Date: Aug 2008
Location: TN, United States
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
Re: (coolhandluke)
K i will do that. Thanks for your help man.
Also i saw that you said that the T1R 63s was discontinued. I also heard that but i see it all over.
Examples-http://jhpusa.com/store/pc/viewPrd.asp?idcategory=353&idproduct=1393
http://www.aj-racing.com/catal...age=2
and a couple others
Also i saw that you said that the T1R 63s was discontinued. I also heard that but i see it all over.
Examples-http://jhpusa.com/store/pc/viewPrd.asp?idcategory=353&idproduct=1393
http://www.aj-racing.com/catal...age=2
and a couple others
Thread
Thread Starter
Forum
Replies
Last Post
citanest
Acura Integra Type-R
4
03-07-2002 10:52 AM
