Need help with Ground control and bilsteins installation
#1
Junior Member
Thread Starter
Join Date: Feb 2002
Location: Santa Fe, NM, US
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
Need help with Ground control and bilsteins installation
I installed my ground controls and bistein shocks.now I noticed there are 4 pieces of alluninium that go some where on there. but unsure where? I have the front all the way up and my car still sits about 4" down. I can
Anyone have a picutere of how they look installed.. i think i installed these wrong
Please help
Anyone have a picutere of how they look installed.. i think i installed these wrong
Please help
#6
Re: (TypeR690)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TypeR690 »</TD></TR><TR><TD CLASS="quote">I got that part installed........but 4 other pieces came with it. not sure what for.</TD></TR></TABLE>
Isn't there an "adapter ring" or two that are installed onto the outer body of the shock, and then the GC threaded sleeve body is fit over the adapter ring(s).
Also if you have the HD bilsteins, there are clips that fit into the notches on the Bilstein shock body to adjust/set the height.
Isn't there an "adapter ring" or two that are installed onto the outer body of the shock, and then the GC threaded sleeve body is fit over the adapter ring(s).
Also if you have the HD bilsteins, there are clips that fit into the notches on the Bilstein shock body to adjust/set the height.
Thread
Thread Starter
Forum
Replies
Last Post
1998_4dr_gsr
Acura Integra
7
03-13-2007 02:35 PM
Jonathan_ED3
Honda CRX / EF Civic (1988 - 1991)
3
06-23-2006 06:03 PM