Koni Yellow Street Settings?
#1
Junior Member
Thread Starter
Join Date: Jun 2003
Location: StickyHot FLA
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Koni Yellow Street Settings?
I was wondering what settings those of you with koni yellows use for the street, i just installed a set and am looking for suggestions...
thanks |
thanks |
#4
Honda-Tech Member
Join Date: Nov 2001
Location: ...
Posts: 6,400
Likes: 0
Received 0 Likes
on
0 Posts
Re: Koni Yellow Street Settings? (chuckus)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by chuckus »</TD></TR><TR><TD CLASS="quote">why all the way stiff in the rear and ful soft up front?</TD></TR></TABLE>
Honda likes terrible motion ratios.
Honda likes terrible motion ratios.
#5
Honda-Tech Member
Join Date: Mar 2000
Location: Lancaster, PA, USA
Posts: 1,309
Likes: 0
Received 0 Likes
on
0 Posts
Re: Koni Yellow Street Settings? (chuckus)
I run 1/2 turn from full soft front and rear on the street; full hard rear and 1-1.5 turns from full soft in the front for auto-x
#7
Re: Koni Yellow Street Settings? (DutchITR1689)
Sorry, I guess I wasnt clear.... Full stiff in the rear is 1/2 turn off of stiff because I heard you should never run full stiff. Then the front setting is 2 turns from full stiff. I run it like this so the *** rotates a little better, may be a terrible setup but I like it.
Thread
Thread Starter
Forum
Replies
Last Post
gsr_to_the_MAX
Acura Integra
17
01-29-2005 06:17 PM