JDM vs. USDM ITR b-pipe lengths
#1
Trial User
Thread Starter
Join Date: Jan 2000
Location: San Jose, CA, USA
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
JDM vs. USDM ITR b-pipe lengths
Does anyone on here know if the JDM ITR b-pipe length is different from the USDM ITR b-pipe length? I know that JDM is stainless and 2.5", and that the JDM header has a longer collector, but, since I don't know about JDM cat lengths, I can't really figure out if the b-pipes are the same length or not.
Does anyone know?
And... does anyone know how CTR b-pipe lengths compare to the ITR b-pipe?
Thanks.
Does anyone know?
And... does anyone know how CTR b-pipe lengths compare to the ITR b-pipe?
Thanks.
#4
Trial User
Thread Starter
Join Date: Jan 2000
Location: San Jose, CA, USA
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
Re: JDM vs. USDM ITR b-pipe lengths (Johnny Tran)
So... the JDM ITR b-pipe is 3" longer than the USDM?
I've heard that the CTR b-pipe is approx. 4" shorter than the JDM ITR... would that mean that the CTR b-pipe is almost the same length as the USDM ITR b-pipe?
Thanks.
I've heard that the CTR b-pipe is approx. 4" shorter than the JDM ITR... would that mean that the CTR b-pipe is almost the same length as the USDM ITR b-pipe?
Thanks.
#5
Trial User
Thread Starter
Join Date: Jan 2000
Location: San Jose, CA, USA
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
Re: JDM vs. USDM ITR b-pipe lengths (CKim)
I'm asking because I have the opportunity to either get a JDM ITR or a JDM CTR 2.5" b-pipe. I'm wondering which will be easier to modify to fit.
#6
Re: JDM vs. USDM ITR b-pipe lengths (CKim)
heres what i know, maybe you can use this info:
on my ek, installed a JDM exhaust made for my car using current USDM cat. did not fit.
shortened cat 3", exhaust fit fine......hopefully that will help you in your quest, or maybe im just an idiot.......probably the latter
on my ek, installed a JDM exhaust made for my car using current USDM cat. did not fit.
shortened cat 3", exhaust fit fine......hopefully that will help you in your quest, or maybe im just an idiot.......probably the latter
#7
Honda-Tech Member
Join Date: Apr 2000
Location: Locust Abortion Technician
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
Re: JDM vs. USDM ITR b-pipe lengths (Johnny Tran)
i see now... ne way.. what makes you think the stock CTR B pipe is 2.5" or the JDM ITR for that matter...
it would be funny cuz the JDM cat at the tribolt flange is a tiny 2" ish just like the usdm..
Id check your sources.
maybe its aftermarket?
it would be funny cuz the JDM cat at the tribolt flange is a tiny 2" ish just like the usdm..
Id check your sources.
maybe its aftermarket?
Trending Topics
#8
Trial User
Thread Starter
Join Date: Jan 2000
Location: San Jose, CA, USA
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
Re: JDM vs. USDM ITR b-pipe lengths (houston)
Actually... I've heard from about 3 people that the JDM ITR/CTR b-pipes are 2.5". Mendrel bent, and stainless steel too!
#9
Honda-Tech Member
Join Date: Apr 2001
Location: Santas Neighbor, Canada
Posts: 4,266
Likes: 0
Received 0 Likes
on
0 Posts
Re: JDM vs. USDM ITR b-pipe lengths (houston)
I don't think the EK9 exhaust is 2.5" either. A guy I know had a JDM EK9 Mugen header and it was only 2.25"...just like USDM ITR.
#10
Re: JDM vs. USDM ITR b-pipe lengths (Tommy_Gunns)
I'm pretty sure the JDM b-pipe is 2.25", can't say I've ever measured it but its definatly smaller than my test pipe which is 2.5"
Sam
Sam
#11
Trial User
Thread Starter
Join Date: Jan 2000
Location: San Jose, CA, USA
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
Re: JDM vs. USDM ITR b-pipe lengths (Sam & Bridget)
At the same time.. it's definitely bigger than the USDM b-pipe. And the JDM ITR cat is 2.5" I believe.
Thread
Thread Starter
Forum
Replies
Last Post