Brake Pads: Are inside different from outside pads? HELP PLEASE :)
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2002
Location: Boost, 12psi
Posts: 700
Likes: 0
Received 0 Likes
on
0 Posts
Brake Pads: Are inside different from outside pads? HELP PLEASE :)
Here's the story folks, I bought these AP Racing pads from HK when I was there.
I put one side in, no problems. The other side, it seems the inside pad is too thick, and is causing the disc to interfere with the caliper.
Are inside different from outside? They look the same to me, and are not marked.
If they are, I need to switch them. Problem is, I can't seem to get the inside pad out of the bracket.
HELP!
I put one side in, no problems. The other side, it seems the inside pad is too thick, and is causing the disc to interfere with the caliper.
Are inside different from outside? They look the same to me, and are not marked.
If they are, I need to switch them. Problem is, I can't seem to get the inside pad out of the bracket.
HELP!
#4
Honda-Tech Member
Join Date: Aug 2003
Location: Louisville, KY, USA
Posts: 1,058
Likes: 0
Received 0 Likes
on
0 Posts
Re: Brake Pads: Are inside different from outside pads? HELP PLEASE :) (BlueIntegraBoy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlueIntegraBoy »</TD></TR><TR><TD CLASS="quote">Inside pad has the metal tab.</TD></TR></TABLE>
well oe for sure, but aftermarket not always.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ericlee303 »</TD></TR><TR><TD CLASS="quote">
Are inside different from outside? ..</TD></TR></TABLE>
no they should be the same thickness.
well oe for sure, but aftermarket not always.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ericlee303 »</TD></TR><TR><TD CLASS="quote">
Are inside different from outside? ..</TD></TR></TABLE>
no they should be the same thickness.
#5
Honda-Tech Member
Thread Starter
Join Date: Feb 2002
Location: Boost, 12psi
Posts: 700
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the responses guys, I finally got them to fit. The cylinder was a bit stuck, and I had to fight with it to get that extra bit of play. Calipers must be getting old.
BTW inside and outsider ARE the same.
My thoughts on the AP Racing pads on white-box rotors: I think you really have to heat them up before they become really effective. For normal street driving, they actually seem a little less grippy than OEM.
BTW inside and outsider ARE the same.
My thoughts on the AP Racing pads on white-box rotors: I think you really have to heat them up before they become really effective. For normal street driving, they actually seem a little less grippy than OEM.
Thread
Thread Starter
Forum
Replies
Last Post
Archidictus
Suspension & Brakes
54
08-12-2005 09:54 PM