150 lb-ft Torque from a 1.8 liter all motor ...
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2000
Location: Woodbridge, NJ, USA
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
150 lb-ft Torque from a 1.8 liter all motor ...
Will post the dyno chart up later ...
DRT Racing installed and tuned the new Accel DFI on their dyno on one of the cars I built with the Endyn 81.5mm in a B18C1 block... final output was 222hp/150.5 lb-ft
Greg
DRT Racing installed and tuned the new Accel DFI on their dyno on one of the cars I built with the Endyn 81.5mm in a B18C1 block... final output was 222hp/150.5 lb-ft
Greg
#3
Honda-Tech Member
Re: 150 lb-ft Torque from a 1.8 liter all motor ... (TRuST)
Yes please...
Sounds impressive Greg!
I was thinking about doing the B20 but this setup sounds very good.
[Modified by Trey, 9:49 AM 3/4/2002]
Sounds impressive Greg!
I was thinking about doing the B20 but this setup sounds very good.
[Modified by Trey, 9:49 AM 3/4/2002]
#4
Honda-Tech Member
Thread Starter
Join Date: Jan 2000
Location: Woodbridge, NJ, USA
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
Re: 150 lb-ft Torque from a 1.8 liter all motor ... (TRuST)
trust,
its nothing extravagant, its the 81.5 high dome rollerwave with eagle rods, Toda spec C cam, Toda header, TWM ITBs and DFI 7.0
trey,
yeah this motor was tuned ont he dyno with 93 octane, its his daily driver car which he runs for money, last time he ran an AWD GSX runnign 20psi, cams, race fuel and tuned by one of Jeff Hills mechanics. He beat the DSM the week before, the following week the DSM tuned the car and ran him, civic got beat by 3/4 car in 4th gears. He has not raced this car with the new found power.
Greg
its nothing extravagant, its the 81.5 high dome rollerwave with eagle rods, Toda spec C cam, Toda header, TWM ITBs and DFI 7.0
trey,
yeah this motor was tuned ont he dyno with 93 octane, its his daily driver car which he runs for money, last time he ran an AWD GSX runnign 20psi, cams, race fuel and tuned by one of Jeff Hills mechanics. He beat the DSM the week before, the following week the DSM tuned the car and ran him, civic got beat by 3/4 car in 4th gears. He has not raced this car with the new found power.
Greg
#5
Banned
Join Date: Mar 2001
Location: at last finally back to sweet home, sunny north cali, usa
Posts: 2,637
Likes: 0
Received 0 Likes
on
0 Posts
Re: 150 lb-ft Torque from a 1.8 liter all motor ... (vtec4gs)
very nice greg. is this the standard TWM kit? please post or email the chart later. i sent u a email too. stock head?
#6
Honda-Tech Member
Thread Starter
Join Date: Jan 2000
Location: Woodbridge, NJ, USA
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
Re: 150 lb-ft Torque from a 1.8 liter all motor ... (frank@b16a.com)
hey frank, yes the standard TWM kit for 94+ GSR ... head was ported by portflow.
Greg
Greg
#7
Honda-Tech Member
Re: 150 lb-ft Torque from a 1.8 liter all motor ... (vtec4gs)
Nice!
Please post up the graph. Gives me an idea of what to do after porting the head and raising the compression..... What octane was this on?
Please post up the graph. Gives me an idea of what to do after porting the head and raising the compression..... What octane was this on?
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Jan 2000
Location: Woodbridge, NJ, USA
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
Re: 150 lb-ft Torque from a 1.8 liter all motor ... (Black R)
hey, just been pretty busy didn;t have a chance to scan the graph to post, I'll try to do it tonight when I get home.
he was running 93 octane fuel, ralphy said he was already aggressive on the ignition timing but could have been even more if we had race fuel to run on the dyno. He'll run it at the track on saturday with race fuel, ralphy said he'll be there to tune it more so we'll see how much trap we can pull out of her.
Greg
he was running 93 octane fuel, ralphy said he was already aggressive on the ignition timing but could have been even more if we had race fuel to run on the dyno. He'll run it at the track on saturday with race fuel, ralphy said he'll be there to tune it more so we'll see how much trap we can pull out of her.
Greg
#9
Honda-Tech Member
Join Date: Jun 2000
Location: Queens, NYC
Posts: 2,577
Likes: 0
Received 0 Likes
on
0 Posts
Re: 150 lb-ft Torque from a 1.8 liter all motor ... (vtec4gs)
Will post the dyno chart up later ...
DRT Racing installed and tuned the new Accel DFI on their dyno on one of the cars I built with the Endyn 81.5mm in a B18C1 block... final output was 222hp/150.5 lb-ft
Greg
DRT Racing installed and tuned the new Accel DFI on their dyno on one of the cars I built with the Endyn 81.5mm in a B18C1 block... final output was 222hp/150.5 lb-ft
Greg
Nice job Greg!
Samaroo Tuned
#10
New User
Join Date: Jul 2001
Location: Santa Barbra, CA, USA
Posts: 1,523
Likes: 0
Received 0 Likes
on
0 Posts
Re: 150 lb-ft Torque from a 1.8 liter all motor ... (vtec4gs)
Sounds like some serious power ! and awesome torque ...I would love to see where this monster makes it's peak torque at
Thread
Thread Starter
Forum
Replies
Last Post
scUba-stEve
All Motor / Naturally Aspirated
2
03-04-2005 10:47 AM
QuestRacing-TypeR
Acura Integra Type-R
23
08-29-2002 06:55 PM
Spyderwebab
Acura Integra Type-R
43
03-06-2002 02:01 PM