vtec128

I have a 96 integra gsr. I just changed my clutch with an OEM EXEDY clutch. I bought the exedy model khc12 for my car which are for the 00 - 01 integras. But it says that 94 - 99 use the khc05.

Heres the story:
I changed my clutch and bought the khc12 clutch kit for my 96 integra. They resurfaced my flywheel cause it was really burnt. So when we finished the car drove fine it went into gear and everything smoothly like how its suppose to. When i came to test drive it the car wouldnt go into gear OR it was REALLY REALLY HARD to go into gear. It would go into gear smoothly when its off. THey bled my clutch. So idk whats the problem. And i used HONDA MTF.

i know b-series clutch are all the same, but could it be the problem why my car wont go into gear when the cars on? My flywheel was burnt and they resurfaced it for me could it be the fly wheel? or is my clutch misaligned and the guy didnt align it correctly?

PLEASE HELP THANKS!

komat

sounds like the pressure plate isnt releasing the disc..

once you get it into gear, does it drive normal in first. where you can slip it a little and go?

vtec128

yeah it drives fine. i drove it around the block.

vtec128

i shifted into all the gears and stuff too. so idkk.

EHondaJDM

Somethin to do with your pressure plate or throw out bearing, id take it back to the shop and tell them to fix it, in don't drive on it too much so they can't say it was you who ****ed it up.

Did you allow it to break in correctly?

lsturbo33

sounds like you need to check and bleed the hydraulic system.

EHondaJDM

Sound like someone needs 2 re-read the op

Discosteak

iTrader: (1)

no he is most likely correct..............check and re bleed your hydraulic system first.