wich pistons rings to use?
10-20-2005, 08:11 AM
#1
Junior Member
Thread Starter
Join Date: May 2005
Location: Rockland, Ontario, Canada
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
wich pistons rings to use?
I'm putting OEM jdm p30 pistons in my jdm b18b and I was wondering wich pistons rings to use and if oem rings are better then aftermarket????
Thanks!!
Parts that I have bought = p30 pistons and locks, crane Springs and retainers, crower 404 cams
taking my head off and sending it away to a machine shop first thing monday!!
Thanks!!
Parts that I have bought = p30 pistons and locks, crane Springs and retainers, crower 404 cams
taking my head off and sending it away to a machine shop first thing monday!!
10-20-2005, 02:00 PM
#4
Junior Member
Thread Starter
Join Date: May 2005
Location: Rockland, Ontario, Canada
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
Re: wich pistons rings to use? (nickG)
but do I use the b18b (my block) or the b16 (cause of the pistons) or does it not matter cause theay are both the same bore size???
10-20-2005, 02:01 PM
#5
Honda-Tech Member
Join Date: Sep 2004
Location: Mountain View, CA, USA
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
Re: wich pistons rings to use? (psegs80)
I'm pretty sure there's only one set of oem rings for the stock bore size, no matter the motor, as long as it's b-series 81mm.
10-20-2005, 05:00 PM
#6
Join Date: Mar 2004
Location: Titusville, FL, US
Posts: 2,568
Likes: 0
Received 0 Likes
on
0 Posts
Re: wich pistons rings to use? (psegs80)
OEM rings run around $100, many builders use the Hastings rings because they are high quality and run around $50 from there web site.
Nice parts you have for your build, I have the same parts except for PR3 pistons instead. I was wondering how you were going to tune this build? I was going to use a chipped P28 with a basemap taylored to these mods for a temp solution until I can get it dyno-tuned. How about you?
Nice parts you have for your build, I have the same parts except for PR3 pistons instead. I was wondering how you were going to tune this build? I was going to use a chipped P28 with a basemap taylored to these mods for a temp solution until I can get it dyno-tuned. How about you?
10-20-2005, 07:09 PM
#7
Junior Member
Thread Starter
Join Date: May 2005
Location: Rockland, Ontario, Canada
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
Re: wich pistons rings to use? (Sam92Teg)
I'm definitly going to get it dyno and for now chip my obd1 P75 ecu!!!! But from what i have herd to really unleash the poer I would need to look into hondata or something along those line!!!
Trending Topics
10-21-2005, 11:23 AM
#8
Join Date: Jun 2004
Location: Annapolis, MD USNA c/o 2008, usa
Posts: 727
Likes: 0
Received 0 Likes
on
0 Posts
Re: wich pistons rings to use? (psegs80)
crome or neptune seems to be a worthy engine management..if you have a good tuner in your area...
my friend is using neptune making 202whp on a 1.8l b16...
my friend is using neptune making 202whp on a 1.8l b16...
10-21-2005, 07:56 PM
#10
Join Date: Mar 2004
Location: Titusville, FL, US
Posts: 2,568
Likes: 0
Received 0 Likes
on
0 Posts
Re: (PogKai)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PogKai »</TD></TR><TR><TD CLASS="quote">I use Nippon Piston Ring.. they supply rings to Honda so it's kind of OEM but cheaper. Works for me!</TD></TR></TABLE>
Ya, I have seen those on Ebay for $50 also, I just haven't seen too many builds using them or I would try them.
Ya, I have seen those on Ebay for $50 also, I just haven't seen too many builds using them or I would try them.
10-22-2005, 06:26 AM
#11
Junior Member
Thread Starter
Join Date: May 2005
Location: Rockland, Ontario, Canada
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Sam92Teg)
Thanks, I think I will saty away!!! I am lloking for after market rings cause I know a distributer and I get stuff under cost...oem stuff is expensive!!!
What are good after market rings???
What are good after market rings???
Thread
Thread Starter
Forum
Replies
Last Post
