wheel bearings
#2
Honda-Tech Member
iTrader: (1)
Join Date: Jan 2002
Location: Nowhere and Everywhere
Posts: 29,530
Likes: 0
Received 52 Likes
on
46 Posts
Parts should be around $100 total, labor anywhere from $50-$100. I just had my front wheel bearings and front lower ball joints replaced last week and it was $300 even, but I removed the steering knuckles myself and took them to the shop, they didn't do anything to my actual car.
#4
Honda-Tech Member
Join Date: Aug 2002
Location: NOR CAL
Posts: 12,464
Likes: 0
Received 0 Likes
on
0 Posts
Re: (coronadrinker)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by coronadrinker »</TD></TR><TR><TD CLASS="quote">cool, thats about the price i was getting for the front bearings.</TD></TR></TABLE>
$90 for bearings, $50 for labor. I pulled the knuckles and brought them to the shop. If you race at all this is a good time to upgrade your studs as well.
$90 for bearings, $50 for labor. I pulled the knuckles and brought them to the shop. If you race at all this is a good time to upgrade your studs as well.
#5
Honda-Tech Member
iTrader: (1)
Join Date: Jan 2002
Location: Nowhere and Everywhere
Posts: 29,530
Likes: 0
Received 52 Likes
on
46 Posts
Re: (skunked)
I'm still wondering just how much money I saved by pulling the knuckles off myself, because it was a royal PITA getting them off and back on, and it still cost me $300 to replace the lower ball joints and wheel bearings, and then another $50 the next day (same shop) to get the car aligned. I want to find out how much it would have been had I just brought the car up there and let them go at it.
#6
Honda-Tech Member
Join Date: Aug 2002
Location: NOR CAL
Posts: 12,464
Likes: 0
Received 0 Likes
on
0 Posts
Re: (PatrickGSR94)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PatrickGSR94 »</TD></TR><TR><TD CLASS="quote">I'm still wondering just how much money I saved by pulling the knuckles off myself, because it was a royal PITA getting them off and back on, and it still cost me $300 to replace the lower ball joints and wheel bearings, and then another $50 the next day (same shop) to get the car aligned. I want to find out how much it would have been had I just brought the car up there and let them go at it.</TD></TR></TABLE>
It would have been a grip no doubt.
It would have been a grip no doubt.
Thread
Thread Starter
Forum
Replies
Last Post