SlammedDC2teg

Whats the best way to Remove Rear window tint? I dont want to scratch the defroster. I have heard of a heat gun but i want to know on how much effort it takes.

forumnoobie

https://honda-tech.com/zerothread?id=1519718

Ericfire66

I used to work in a detail shop and the best way to remove it would be to get some ammonia and soak the tint. Just lay down plastic in the car so that you dont get it everywhere. Then use a razor blade and it should come out pretty easily. You just have to be careful with the defrost grid on the back window.

SlammedDC2teg

thanks. Any other ideas? Also where can i get some amonia?

Ericfire66

You can get ammonia in the cleaning products aisle at your local super market.

GSRNetics

Another good way, to remove tint where you should NOT have to scrape the window, go buy some ammonia as other people have suggested, then go out on a nice and warm sunny day (the sunnier the better), and take a thick large plastic bag and cut out the shape of the window. Now cover anything that you dont want ammonia on in the back, and spray the window down with ammonia (gonna stink really bad) and then put the window cutout on the inside of your window. Get all the bubbles out and make sure the bag is sticking to everything. Let the back window bake in the sun for about 10-15 minutes (heat+ammonia FTW) and then you should easily be able to peel the back tint off.

batmang yO!

forget amonia, the easiest way is to remove window tint is to use a steamer.

Ericfire66

Beavis is right, I totally forgot about that. If you have access to a steamer definetly do it that way!

SlammedDC2teg

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ericfire66 &raquo;</TD></TR><TR><TD CLASS="quote">Beavis is right, I totally forgot about that. If you have access to a steamer definetly do it that way!</TD></TR></TABLE>
Ok. Is that easier than using a heat gun?

Ericfire66

Yes it would be.

batmang yO!

I removed all the tint on all my windows using a steamer, worked perfect.

ECKOTYPER

when i did mine... i pulled the tint off by hand... then used goo gone, best and cheapest way to do it i think

ECKOTYPER

also it depends what kind of tint to how easy it is, i said i pulled mine off by hand... and i pulled the tint in one piece not thousands of pieces hehe ONE PIECE

coronadrinker

dude F all that, your car looks sick as is, sorry i'm no help

god.loves.ugly

I used an iron and the steam feature on it. cause I didn't have a steamer and I must say steam blows a razor or ammonia out of the water.