washer camber trick
#1
Honda-Tech Member
Thread Starter
Join Date: May 2005
Location: orange county, ca, usa
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
washer camber trick
i recently bought some omnis front camber kits and had it installed and did an alignment...i was wondering if i did the washer camber trick would i have to go through alignment again?
#4
Honda-Tech Member
Thread Starter
Join Date: May 2005
Location: orange county, ca, usa
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
Re: washer camber trick (mr.beeks)
i already installed my front cambers and got an alignment...but if i do the washer trick today will i have to go get another alignment?
#6
Re: washer camber trick (97xGsR)
If you do the washer trick to fix the camber in the back best to eye then you should bring the car to get the toe aligned in the rear. I think that's what he was asking, if he needs to get the toe aligned. If the shop was really good and wanted to get your camber perfect they could also work with shimming the upper control arm with different combinations of washers.
#7
Honda-Tech Member
Join Date: Mar 2005
Location: Orlando, Florida, United States
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
Re: washer camber trick (Honda Hick)
i have the same setup and what i did was i gave the shim kit to the alignment shop and they fixed the rear camber with the washers for me. Go to your alignment shop and ask them to just do it for you.
Trending Topics
#9
Re: washer camber trick (Honda Hick)
is there anyway you can explain to me how toe is adjusted in the rear? i have yet to see anything adjustable back there, and i have installed rear tailing arms 4 times.
#10
Re: washer camber trick (matto23)
On the front of the rear trailing arm there is a compensator arm that connects it to the frame. Where that compensator arm attaches to the frame it is adjustable. If you loosen it up you can move it back and forth and it tilts the trailing arm.
Thread
Thread Starter
Forum
Replies
Last Post
Noah Santana
Honda CRX / EF Civic (1988 - 1991)
11
01-18-2017 06:09 AM