Using Ohm meter to check condition of spark plug wires
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2005
Location: Los Angeles, CA, United States
Posts: 1,252
Likes: 0
Received 2 Likes
on
2 Posts
Using Ohm meter to check condition of spark plug wires
Hey guys I know how to test a spark plug wire to see if it is giving off a spark by either hooking up a spark plug to it and doing a visual or putting the end of the sparkplug wire near a ground to see if i can see a spark but... What about resistance. OHMs.
What happens when your spark plug wires are not to the resistance of new ones?
What are integra spark plug wires supposed to read on an ohm meter?
What happens when your spark plug wires are not to the resistance of new ones?
What are integra spark plug wires supposed to read on an ohm meter?
#2
Honda-Tech Member
Join Date: Sep 2008
Location: Acura, Va
Posts: 1,263
Likes: 0
Received 0 Likes
on
0 Posts
Re: Using Ohm meter to check condition of spark plug wires
I'm not a 100% sure but It might be something like 2k-5kOhms per foot.
You might just want to try google or something. What does your old ones read?
You might just want to try google or something. What does your old ones read?
#3
Honda-Tech Member
Re: Using Ohm meter to check condition of spark plug wires
depends on the wire. what you basically do is test all 4 and see if they are close, if you have 3 that read 2k ohms and one that's at 12k you have issues. wires are a general maintenance item that most of us just replace every few years.
#5
Honda-Tech Member
Re: Using Ohm meter to check condition of spark plug wires
for oem wires probably, any others they vary. msd wires for example have almost no resistance in comparison. roughly 150 ohms/foot. i forgot where oem was but it's over 1000ohms foot
Thread
Thread Starter
Forum
Replies
Last Post
JDM_SOHC
Honda Civic / Del Sol (1992 - 2000)
7
04-30-2007 02:24 PM